If you have ever dropped your Roku Tv remote and the screen went blank, don’t worry; you’re not alone. According to experts, this is one of the most common problems with Roku TVs. But don’t fret; there are ways to fix a broken Roku Tv screen. In this article, we will discuss how to fix a broken roku tv screen. And get your screen back up and running in no time!
Fixing a broken roku tv screen is straightforward and can be done in minutes. But it is important to remember that Roku Tv screens are incredibly delicate and be very careful with them. Always wear protective gloves when repairing your television. And do not use any liquids or cleaning agents on it as they can damage the screen even further!
Summary: This guide provides steps to help you fix a broken Roku TV screen. It involves determining how to remove the broken screen, removing internal parts of the Roku TV, removing the damaged screen from the broken casing, attaching a replacement screen, reassembling the broken Roku TV and testing it. Following these steps should help return your Roku TV to its original condition.
Tools and Materials
The Materials Required to Fix a Broken Roku Tv Screen Are:
- Roku Tv Replacement Screen
- Phillips head screwdriver
- Mini flathead screwdriver
- Newspaper or another protective lining to work on
- Thin metal sheet
- Thin clear tape
A Step by Step Guide on How to Fix a Broken Roku Tv Screen
Step 1: Determine How to Remove the Broken Screen
To start, figure out how the screen has broken. If it’s cracked but otherwise unharmed, you can bypass this step. But if there are any cracks or dents on the Roku TV set’s casing, you’ll need to open up the television and take out the screen.
Use a screwdriver to loosen all of the screws around the frame of your Roku TV set. One screw
holds down each corner of the frame, while one on either end of each side holds down that particular side. The rest are internal, holding down internal braces running through your TV set that support moving parts like hinges on doors.
To remove the frame from your Roku TV set, unscrew the screws with a screwdriver. Then, hold down opposite corners of the frame with your thumbs and pull it away from the front of the set. Be careful not to pull the television out towards you, as this can damage the hinges and internal braces.
If any of the screws had been challenging to remove, turn them over in your hand while holding onto them so that they cannot roll off a table or desk while you work.
Step 2: Remove Internal Parts of Your Roku TV Set
Pry open each side of your television from its respective corner with a screwdriver, then push slightly downward on both sides of the television until you hear a click from inside the set. This is the sound of your Roku TV’s casing releasing, and you can place it on a folding table or another suitable surface to work with.
After opening up your Roku TV set, check to see if any screws are holding down internal braces that will not come loose quickly due to tight fits. If this is the case, turn them over so as not to roll off any work surface while continuing with your repair project.
Step 3: Remove Damaged Screen from Broken Casing
After unscrewing all of the internal screws from your Roku TV set, you can remove its broken screen by prying at opposite corners gently until it pops out of place and slides away from you. Be careful not to use excessive force, or else you might damage your television set further.
Step 4: Attach Replacement Screen
After confirming the Roku Tv replacement screen fits inside your Roku TV set, slide it into a
place where the old screen once was and make sure all connecting edges are correctly aligned. If there is no LED screen attached, affix one by pressing it gently into place with your fingers. Next, ensure any antenna wires pass through whatever opening they need to reach the motherboard before screwing down your new screen using one long Phillips head screw at each corner of the frame.
Step 5: Reassemble Broken Roku TV Set
If you’ve put your Roku TV back together and it’s not working, review the steps you took to take it apart. Make sure you didn’t miss any screws or parts. If everything looks good, turn on the power and see if it works.
If it is still not functioning correctly after reattaching both parts, check for loose connections between internal parts like screws holding down antenna wires to their respective connections inside your Roku TV set. If they are all tightly connected, it may be necessary to replace broken parts with new ones before turning on your television again.
Step 6: Test Your Roku TV
If you have reassembled your television correctly, it should power on without any problems. However, if this is not the case and your Roku TV set still has problems powering on, you might need to replace internal parts with new ones before testing your television set again.
Even if everything is working perfectly, you may want to consider taking precautions against future issues by using a surge protector for your Roku TV. Surge protectors can be bought online or at a local hardware store and provide an additional layer of protection from power surges that might damage or wear out essential components in your unit. These steps will help in how to fix a broken roku tv screen.
Precautions
- Be sure to unplug your Roku TV before beginning. Also, be aware that you will be working with bare hardware, so read the instructions carefully and handle all parts gently.
- Do not force any tools or components to fit if they seem too small. If anything seems out of place, it probably is.
- Ensure that all screws are screwed in tightly before moving on to another step. Screws should be “finger tight,” meaning you shouldn’t need a tool to twist them the rest of the way in
- There shouldn’t be any exposed electronics, so don’t worry about static electricity damaging your TV.
Be aware that more than one screw may hold a cable in place. Unscrewing the wrong screws could damage your TV and void any warranties, so triple-check your work before powering up. Of course, you can always take it apart again if you need to.
Avoid Broken Screen on Roku Tv
One of the greatest gadgets that makes our lives more comfortable is Rokus. The contentions are lined, top-notch quality, and setup take less than 5 minutes. But if you are not careful, your Roku TV may display a blank screen or put up an error message. The following solutions will help solve this issue.
- Use high-speed internet for seamless loading of high-definition channels like Netflix, Hulu Plus, etc.
- You can connect your Roku player with your TV using an HDMI cable to get the best quality output.
- To enhance the clarity and brightness of the picture, adjust sharpness properly by tapping on Settings – >Video Settings -> Resolution -> High (1080p).
- Always check for any defects in cables before connecting them to your Rokus. If damaged, replace them with new ones. It is advisable to use the HDMI cable that Roku provides.
- Keep your Roku device updated by going to Settings – > System Update. The latest software update will help prevent further problems with the Rokus.
- For a better picture and audio clarity, reduce any interference from other devices in your house or turn off all unused electronics equipment when watching content on Roku devices.
How Do I Reset My Roku With a Broken Screen?
If you cannot access the Roku interface or reset your device, then here is how you can reset it.
Before setting up your Roku again, make sure that your TV is set to the correct input (e.g., HDMI 1, Component Input) and check if the video cable is securely plugged in.
After completing this step, please turn off your television/display screen and unplug all cables attached to it, including the power cord, for 10 seconds.
Plug back in the display screen/TV and all cables and turn it on. Now set up your Roku device by following instructions available at the home screen of the Roku player/device. Once done, launch any channel available on Roku player to check if it’s working as expected.
FAQs
What Can I Do With a Cracked Tv?
If you have a broken Roku tv, don’t panic yet. Before you call the Roku Company to send out a technician to fix your television or replace it entirely, there are some things that you can do first to continue using your Roku Tv without having to spend money on replacing it. You’re probably wondering what you can do with a crack running through the middle of your screen. There are a few tips and tricks that you can do to get at least a little bit more life out of your TV.
How Much Does It Cost to Fix a Tcl Roku Tv Screen?
The cost of repairing a TCL Roku TV can vary. If your screen is cracked, you’ll have to replace the entire unit. If your screen is black or white with no picture, you may need to replace a fuse or capacitor. The average cost range for repairing TCL Roku TVs varies from $100 to $150 depending on the problem and whether parts are available.
You Can Check It Out To Fix 3ds Charger Port
Conclusion
So there you have it, how to fix a broken roku tv screen. If your Roku screen is broken, don’t panic. You can fix it yourself and save a lot of money. Just be sure to follow our simple steps carefully, and you should be up and running again in no time.
You Can Check It Out To Fix Pink Screen on Hp Laptop