How to Fix Broken Hoop Earrings

Earrings can be a great accessory to any outfit, but what do you do when your hoop earrings break? This blog post will show you how to fix broken hoop earrings using a few simple tools. Keep reading for more tips on how to repair your hoop earrings.

How to Fix Broken Hoop Earrings

The good news is that they often can be repaired, and it’s usually not too difficult. This article will show you how to fix a broken hoop earring using basic tools and supplies. This guide will show you how to fix them using some basic tools and supplies. Read on for instructions on how to repair your hoops safely and efficiently.

10 Simple Ways on How to Fix Broken Hoop Earrings

1. Super Glue:

This is probably the easiest and quickest method to fix hoop earrings. First, make sure to use a thin layer of super glue and place the earring on a flat surface. Hold it in place until set, and then let it dry for about 30 seconds or longer, depending on what type of glue you use. Once dry, make sure to test the earrings before wearing them. If they are still loose, repeat this step once more and let them dry for another 15 minutes.

2. Using Duct Tape:

If you want to keep your hoop earrings from getting loose, you can try this prevention method. Sometimes when you wear hoop earrings, they can become loose because one of the hoops has stretched to fit your earlobe. To prevent this from happening, you can try wearing the earrings on the top part of your ear instead of letting the hoop go all the way through your earlobe.

All you need to do is take a bit of duct tape and place it over your hoops like you would on a hoop earring back. Test them out, and if they feel snugger, discard the duct tape and enjoy your tighter-fitting earrings!

3. Installing Hoop Earring Backs:

If your hoop earrings are too loose, you can try replacing the stopper with a new one. If that doesn’t work, you can try duct taping around the back of your earrings.

4. Re-Shape or Resize a Ring:

If you are comfortable using a soldering gun or metal cutter, you can attempt to re-shape your broken hoop earrings. First, you need to cut off the earring part that has come loose and then sold it back onto itself.

Cut Off the Earring Part

5. Using Glue Gun:

If your hoop earrings have become too loose due to stretching, you can cut off the excess wire with metal shears and easily attach them back onto themselves using a low-setting hot glue gun. This method will be similar to supergluing your broken earrings, but the benefit of using a glue gun is that you can customize the size of the ring you need.

6. Wire Cutters:

This is a permanent fix for your broken hoop earrings, and it involves re-weaving the loose wire back through the hoop of the earrings with metal collars or silk thread. It isn’t necessarily difficult, but it does require time, patience, appropriate tools, and precision.

First, the process requires you to twist a small piece of wire around the core wire to secure it. Then you would do this for the remaining loose pieces and continue weaving them through your hoop earrings.

7. Soldering:

This is a permanent method, so if you are uncomfortable with this method, don’t do it. Instead, you need to sell your broken hoop earrings back together and then file the folds until smooth.

8. Using Fake Hoop Earrings:

If you’re feeling a bit underwhelmed by all these temporary solutions, you can buy high-quality fake stainless steel hoop earrings for cheap. They are very similar in size, so they should give your broken hoop earrings the same feel.

9. Using the Wire of Closed Hoop Earrings:

If you don’t want to do any of the above methods, you can create an earring back out of the wire on your closed hoop earrings. First, take some needle-nose pliers and remove whatever clamp is holding the earring together, including any small pieces of metal. Then you can put that wire into a hoop earring backing and attach it to your broken hoop earrings.

Take Some Needle-nose Pliers

10. Replace a Broken Clasp:

If you have a broken clasp, then it is straightforward to replace. Some jewelers may even give you a discount on the labor since replacing the clasp would require them to take off any attached stones or metal pieces from your earrings, making it more difficult for them. As long as you know your size for hoop earrings, all you need to do is find the appropriate clasp at any craft store or jeweler.

Some Helpful Tips and Suggestions

Here we have given some tips on how to fix broken hoop earrings.

  1. Use a cup with a lot of crushed ice and enough vinegar to immerse the earrings.
  2. Gently remove the broken posts from the hoops.
  3. Glue new posts on top of old posts, and let them dry for 24 hours before wearing your earrings again!
  4. Use clear nail polish as a safeguard against your new posts loosening and falling off.
  5. Be sure to support the backs of your new posts, so they will not come out of the hoops.
  6. Check your earrings regularly for any separation between posts and hoops. If there is a gap, use clear nail polish again to safeguard!
  7. If there is any question that you will be able to do this repair on your own, take the hoops and broken earrings to a professional jeweler.

Five Different Types of Hoop Earrings

1. Hinged Hoop Earrings:

Hinged hoop earrings can be opened so that you can slide the post in. Ensure that they are always tightly closed not to fall out.

2. Hook & Post Hoop Earrings:

Hook & post earrings are usually hinged; however, you can find them in many other forms. Commonly, the hook is located on the hoop-back instead of at the bottom. Ensure that your hook clasp is tightly closed not to fall out.

Ensure That Hook Clasp Is Tightly

3. Threaded Hoop Earrings:

A threaded rod with a screw-type mechanism is passed through one end of the hoop, then it goes through the ear and finally is screwed into the other end of the hoop. Ensure that your rod clamp is tightly closed not to fall out.

4. Lever Back Hoop Earrings:

Lever-back earrings have a mechanism to open up a clasp and put it on or take it off as desired. When the earrings are not in use, ensure that the clasp is tightly closed so that it will not fall out.

5. Magnetic Hoop Earrings:

These earrings have two magnetic discs, one on the hoop and the other in the clasp. They will not break because of their design; however, the discs can come apart if they are dropped or mishandled. If this happens, slide them back together.

Can You Use Super Glue on Earrings

Normally, earrings can be made from various materials and come in many different styles. However, one thing that many types of earrings have in common is the use of small hoop-shaped pieces to connect the front piece, whether it is an earring post or a different kind to the back piece. 

These hoops are typically made from either stainless steel or gold (typically 14k or 18k). When shopping for earrings, check the back of the earring hoop to check what material it is made from. This is important because it will indicate what kind of metal glue you should use to repair the earring.

How Do You Remove Seamless Hoop Earrings

If the earrings are seamless, there is no need to remove them. You can replace the broken pieces with new ones easily. Fixing earrings are always better than throwing them away, so you get to keep your favorite pair of earrings! If you have an expensive earring that you don’t want to get damaged, this is the best option. There are several kinds of earrings which you can fix yourself if they break. This is because there are pins on them to allow for easy replacement.

Replace the Broken Pieces

If your earrings fall into one of these categories, you can easily replace the broken parts without going to a store. People always find it hard to part with their favorite earrings no matter how often they are worn. If you break one of your beloved hoops, then here are some tips on how you can fix them yourself without having to buy new ones! Be sure to check this entire blog post on how to fix broken hoop earrings to get started.

You Can Check It Out to: Repair Rotted Wood in a Fiberglass Boat

Frequently Asked Questions

Can Hoop Earrings Be Fixed?

While it is possible to fix hoop earrings, doing so may be a bit challenging. If the hanger has been bent or broken, it may be difficult to put it back together correctly. Additionally, if the studs have come off of the post, they will need to be replaced with new ones.

If you’re able to fix your hoop earrings relatively easily and they still don’t look right after being repaired, you can try putting them back on using rubber bands or adhesive tapes. Be sure that these methods are secure enough so that they do not fall off again in the future (and eyesight isn’t compromised).

What Glue Do You Use To Make Earrings?

You can use a variety of adhesives to make earrings but bear in mind that some are more permanent than others. The most popular types of glue include hot melt, eye-drop (or dropper), and super glue.

Hot melt glue is the easiest to use as it requires only warm water and adhesive. It can be used on Both small and large items, making it a versatile choice for earring production. Eye-drop or dropper glue is similar to hot melt except that you need to carefully measure the amount of adhesive required before using it. This type is ideal for smaller objects such as pieces of jewelry because less material is needed per piece. Superglue must be heated up before applying which makes it dangerous if not handled properly; therefore, this type should only be used when necessary due to its high cost.

Who Started Wearing Hoop Earrings First?

Different sources attribute the wearing of hoop earrings to different celebrities and historical figures. Some say that hoop earrings were popularized by actress Elizabeth Taylor in the late 1950s, while others credit singer Whitney Houston for popularizing them in the early 1990s. It’s likely that hoop earrings became popular for a number of reasons – some believe that they give the appearance of taller or more slender women, while others believe that they provide a degree of privacy for women who wear them in public. In any case, it’s clear that hoop earrings are a popular accessory and have been worn by many famous women over the years.

Can A Snapped Earring Be Fixed?

Yes, a snapped earring can be fixed. It may require minor surgical repair, but it can be done. There are various methods that you can use to fix a snapped earring including using adhesive tape or pliers. If the metal is too tight to remove with these methods, then it may require a jeweler’s saw or laser to break the wire free and make necessary repairs.

Whatever method you choose, ensure that you take all precautions needed while performing the repair so as not to damage surrounding jewelry or your hearing in any way. Remember also to wear earplugs when swimming or exercising if possible in order for your ears not become further mangled during an unfortunate accident!


There are many different options for fixing

broken hoop earrings. If you have a pair of hoops with one or more gaps, the best solution is to replace them. However, if replacing your hoops isn’t an option, and you don’t want to wear mismatched jewelry, other ways are to fix your worn-out hoop earrings. Hoop earring backs may be used as separators between the gap to cover it up temporarily.

Another way is by using clear nail polish, which also serves as a temporary fix until they can be replaced or repaired at home. Finally, some people use tiny pieces of tape that go around the circumference of their ear slides so they will not slide off easily when wearing them on their ears. We hope this blog post on how to fix broken hoop earrings has been helpful. Let us know your thoughts in the comments below!

You Can Check It Out to: Repair Cut Sprinkler Wire

Leave a Comment