How to Fix Studs Showing Through Drywall

Drywall is a popular material for walls and ceilings in homes. It’s easy to install and relatively inexpensive. However, when a hole is made in drywall, the studs behind the drywall are often visible. 

This can be unsightly and can make mounting something to the wall more difficult. To fix the studs showing through your drywall, you will need some materials and a little bit of know-how. In this blog post, we will show you how to fix studs showing through drywall. Happy fixing!

How to Fix Studs Showing Through Drywall 

Tools Needed 

  • Drywall saw
  • Drywall patch kit
  • Putty knife
  • Sandpaper
  • Paint (optional)

7 Authentic Steps Guide on How to Fix Studs Showing Through Drywall 

Step 1: Check the Wall

When you’re about to start a home improvement project, it’s important to make sure that you won’t be inadvertently causing any damage. That’s why, before you start removing drywall, it’s crucial to check the wall for any electric wires or plumbing.

Once you’ve located and marked any potential hazards, you can begin your project with the confidence that you won’t be putting yourself or your home at risk. With a little bit of planning, you can avoid any costly accidents and ensure that your home improvement project is a success.

Check the Wall for Any Electric Wires or Plumbing

Step 2: Cut Out a Section  

If you’re noticing studs showing through your drywall, it’s time for a repair. The first step is to cut out a section of drywall around the exposed studs, making sure to leave about six inches of extra space. Once the section is removed, you’ll be able to see the studs and any damage that may have been done. 

If the studs are in good condition, you can simply screw them back into place and patch up the drywall. However, if the studs are damaged or weakened, you may need to replace them entirely. Either way, once the repairs are complete, your drywall should be good as new.

Step 3: Cut Out the Studs

Most homes have drywall between the studs in the walls. Drywall is a necessary component to finish the interior of your home. It not only provides a finished look, but it also helps to insulate and soundproof your home. Occasionally, you may need to cut out a section of drywall to access the studs behind it. 

For example, if you are hanging a heavy object on the wall, you will need to be able to find at least two studs to support the weight. To do this, simply use your drywall saw to cut along the edge of the stud. Be careful not to damage any surrounding drywall or wiring as you cut. 

With the stud exposed, you can then proceed with your project knowing that you have solid support for your heavy object.

Cut Out a Section of Drywall

Step 4: Cut Correctly

Using a drywall patch kit is a relatively easy way to repair small holes in your walls. You have to cut the replacement piece of drywall to the correct size. You’ll want it to be slightly smaller than the hole so that it fits snugly against the wall. Once you’ve cut the drywall, use the instructions included with your kit to attach it to the wall. 

Make sure to apply pressure evenly around the entire circumference of the drywall so that it adheres properly. Once you’ve attached the drywall, you can then use a joint compound and a putty knife to smooth out any imperfections. If done correctly, this repair will be virtually undetectable.

Step 5: Smooth Over the Seams 

If you’ve ever looked closely at a wall, you may have noticed that the surface isn’t completely smooth. There are often small gaps where the sheets of drywall come together.

These gaps can become even more pronounced over time, as the drywall expands and contracts with changes in temperature and humidity. While these gaps may not seem like a big deal, they can cause problems with the structure of your walls.

If the seams are left unchecked, they can eventually lead to studs showing through the drywall. Fortunately, there’s an easy way to fix this problem: simply use a putty knife to smooth over the seams.

By filling in the gaps, you’ll help to reinforce the structure of your walls and prevent studs from showing through.

Small Gaps Where the Sheets of Drywall

Step 6: Sand Down Any Rough or Jagged Edges 

If you’re seeing studs showing through your drywall, it’s time for a repair. The good news is, this is a relatively easy fix. Sand down any rough or jagged edges of the new drywall so that it is flush with the rest of the wall. You’ll want to make sure to wear a mask while doing this to avoid inhaling any dust. 

Once the new drywall is smoothed out, apply a thin layer of joint compound to the seams and nail holes. Allow this to dry completely before sanding it smooth. Apply a coat of primer and paint to finish the repair. With just a little effort, you can make those studs disappear!

Step 7: Prime and Paint the Area 

If you’re looking to make a quick repair to your drywall, there’s no need to go through the hassle of painting the entire area. In most cases, repairing the studs that are showing through the drywall is all that’s required. 

However, if you want to give the area a fresh coat of paint, there are a few things you’ll need to do first. Prime the area with a high-quality primer, and then use a brush or roller to apply even strokes of paint. Once the paint is dry, you’ll be able to enjoy your newly refreshed drywall.

You’re Done! You’ve Successfully Fixed Studs Showing Through the Drywall. 

These simple steps will help you fix the issue of studs showing through your drywall and avoid having to replace it entirely, saving you time and money.

Painting the Entire Area

9 Additional Tricks on Fixing Studs Showing Through Drywall 

  1. Use a stud finder to locate the studs on your wall.
  2. Cut a piece of drywall to fit over the area where the stud is showing.
  3. Attach the piece of drywall to the stud using drywall screws.
  4. Use a joint compound to fill in any gaps between the new piece of drywall and the surrounding area.
  5. Allow the joint compound to dry completely.
  6. Sand the area smoothly.
  7. Paint or wallpaper over the repaired area.
  8. If you are painting, use a paint that is similar in color to the surrounding area so that the repair is less noticeable.
  9. If you are wallpapering, choose a pattern that will help to camouflage the repair.

The Procedure for Fixing a Hole in Your Drywall

Drywall is a sturdy material, but it’s not indestructible. Holes can form for any number of reasons, from careless accidents to vigorous play. Whatever the cause, it’s important to know how to fix a hole in your drywall so that you can avoid further damage and ensure a professional-looking repair.

The first step is to clean up the area around the hole. Remove any loose pieces of drywall and vacuum up any dust. Next, cut a piece of drywall that’s slightly larger than the hole. Place the new piece over the hole and secure it in place with screws or nails. Once the new piece is in place, you’ll need to apply joint compound to the seams and around the edges of the patch. 

Use a putty knife to spread the joint compound evenly, then smooth it out so that it’s flush with the surrounding wall surface. Allow the joint compound to dry, then sand it down so that it’s level with the rest of the wall. Finally, paint over the patched area to match the rest of the wall. With these simple steps, you’ll have your drywall hole repaired in no time!

You Can Check It Out Fix Scratches on Drywall

How to Fix Cracks in Your Drywall?

No one likes the sight of a cracked wall, but sadly, it’s a common occurrence in many homes. Over time, cracks can form due to settling foundations, Temperature changes, or even just everyday wear and tear. While some cracks may not be much more than cosmetic blemishes, others can pose a serious threat to the structural integrity of your home. Fortunately, there are a few simple ways to fix cracks in your drywall.

For small cracks, all you’ll need is some spackle or joint compound and a putty knife. Just apply the compound to the crack with the putty knife, then smooth it out. Once it’s dried, sand it down until it’s flush with the rest of the wall surface.

For larger cracks, you may need to use a patching kit. These kits come with everything you need to repair cracks up to about four feet long. First, cut out a section of drywall that extends six inches beyond the crack on all sides. 

Next, install metal corner beads at the corners of the opening, then secure them in place with nails or screws. After that, apply the joint compound to the bead with a putty knife, then press a piece of drywall into the wet compound. Finally, apply a joint compound to the seams and let it dry before sanding and painting over it.

With just a little bit of effort, you can repair cracked drywall and restore your walls to their former glory.

You Can Check It Out Repair Brick Wall That Has Shifted


There are a few ways to fix studs that show through the drywall. The most important thing is to make sure that you address the problem as soon as possible so that it does not become worse over time. You should carefully determine how to fix studs showing through drywall. 

Make sure that the wallplates are level with each other before attaching them to the wall. Once they’re secure, finish by screwing in the light switch or outlet cover. These easy steps will ensure that your studs don’t show through your drywall and ruin the aesthetic of your room.

Leave a Comment