How to Fix a Burnt Suorin Air Pod

If you have ever had the unfortunate experience of burning a Suorin Air pod, you know that it can be a tricky fix. In this blog post, we will walk you through the steps on how to fix a burnt suorin air pod and salvage your pod.

How to Fix a Burnt Suorin Air Pod

Keep in mind that there is no guarantee that these steps will work, but it is worth a shot if you cannot find a replacement pod. We’ll also provide some tips to help you avoid burning your pods in the future. Let’s get started!

Summary: Fixing a burnt Suorin Air Pod is not as hard as you think. First, disconnect the pod from any power source and let it cool down. Then, grab a Phillips head screwdriver and unscrew the back panel from the device. Once done, unscrew the tight screws on the board and carefully remove them. Next, identify the burnt component on the board using a magnifying glass and discard it. Finally, purchase a new component to replace it and solder it onto the board with an iron or soldering gun.

8 Reasons That Causes a Burnt Pod

1. Battery Life Is Too Short:

The most common reason for burnt pods is either changing the wattage on your mod, or using a bad battery. Be sure to get rid of any dead batteries and get yourself a new one to avoid this issue.

2. Faulty Pod:

If you notice your pod starting to bulge or develop black spots, it may be time to get a new one. This is because an internal defect in the pod can cause the coil to overheat, leading to a burnt pod.

3. No Maintenance:

Tossing your pod in your pocket and going might seem convenient, but those tiny little coils don’t last forever. On the other hand, it’s quite easy to maintain these pods, so don’t be lazy and stop using it if you notice a burnt taste or bad vapor production. For more information on how often you should clean your pod, check out our blog post.

4. Using Weak E-Liquid:

If you want to avoid gunking up your pod, don’t use e-liquids that are flavored like desserts. These tend to be very sweet and have a lot of sugar, which can make your pod dirty quickly. It’s better to stick to regular flavors that don’t have any extra sweetness. If you’ve already been using a sweet e-liquid, make sure to clean your pod really well and put in a new coil before using it again.

5. No Coil Replacement:

You must remember to replace the coil every so often. If you don’t, it’ll develop a burnt taste that will affect your pod’s overall flavor and performance. In addition, you should start noticing that your vapor production becomes lower and harsher around the time when you should change your coil.

Replace the Coil

6. Overfilling Your Pod:

Don’t fill your pod up to the top, as it’ll overflow and make a mess inside your Suorin Air device. Instead, you should leave around 3-4 drops of e-liquid left in between vaping sessions. But don’t worry too much about refilling your pod frequently, as these pods can hold around 2ml of e-liquid.

7. Pod Is Not Securely Attached:

If you have trouble getting the pod to click on, it might be because it’s not completely secure. First, make sure that your pod is clicked into place, but if it doesn’t seem like it is, then carefully try to attach it again, ensuring the connection is made correctly.

8. Vaping At Too High Wattage:

You need to make sure that you don’t vape at a too high wattage for your device. You should start noticing a burnt taste and bad vapor production when it becomes time to lower the wattage on your mod. You should not vape at a wattage that is too low, because this can damage your atomizer. Vaping at too low of a wattage can cause your atomizer to overheat and this can damage the coil.

15 Effective Steps on How to Fix a Burnt Suorin Air Pod

Step 1: Assess the Damage to the Suorin Air Pod

Begin by examining the burnt Suorin Air Pod to determine the extent of the damage. Look for signs of burning or melting on the pod, the coil, or the wick. Make note of any damage, as this will help you decide which steps to take for repair and whether replacement parts are necessary.

Step 2: Disassemble the Suorin Air Pod

Carefully disassemble the Suorin Air Pod by removing the mouthpiece, the pod itself, and the coil. Be cautious when handling burnt or damaged components, as they may be fragile or sharp.

Step 3: Clean the Pod Components

Thoroughly clean each part of the Suorin Air Pod using a soft brush, a microfiber cloth, or a cotton swab dipped in isopropyl alcohol. This will help remove any residue or debris that may have accumulated due to the burn. Be sure to clean the contacts on both the pod and the battery, as these can become dirty or corroded over time.

Step 4: Replace the Burnt Coil

If the coil is burnt or damaged, it will need to be replaced. Purchase a compatible replacement coil for your Suorin Air Pod, and follow the manufacturer’s instructions to install the new coil. Ensure that the coil is securely attached and aligned properly within the pod.

Step 5: Replace the Burnt Wick

If the wick is burnt or damaged, it will also need to be replaced. Purchase a compatible replacement wick for your Suorin Air Pod and follow the manufacturer’s instructions to install the new wick. Make sure that the wick is positioned correctly within the coil, with no loose or frayed ends.

Step 6: Reassemble the Suorin Air Pod

Once the damaged components have been replaced and all parts have been cleaned, reassemble the Suorin Air Pod. Ensure that all parts are securely connected and properly aligned. Double-check that the coil and wick are in their correct positions, and that the pod is fully seated on the battery.

Step 7: Refill the Pod with E-Liquid

Refill the Suorin Air Pod with your preferred e-liquid, taking care not to overfill the pod. Be sure to use a compatible e-liquid, as certain types may not work well with the Suorin Air Pod and could contribute to burning or other issues.

Step 8: Allow the Wick to Saturate

Before using the repaired Suorin Air Pod, allow the wick to fully saturate with e-liquid. This typically takes a few minutes but can vary depending on the specific coil and wick combination. Allowing the wick to saturate helps prevent dry hits, which can lead to burning and damage.

Step 9: Test the Repaired Suorin Air Pod

Once the wick has saturated, test the repaired Suorin Air Pod by taking a few gentle draws. Be cautious not to inhale too forcefully, as this can cause e-liquid to flood the coil and lead to spitback or leaking. If the pod functions correctly and produces satisfactory vapor, the repair was successful.

Step 10: Monitor the Repaired Suorin Air Pod

Keep a close eye on the repaired Suorin Air Pod, checking for any signs of burning or damage. Regularly inspect the coil and wick for signs of wear, and replace them as needed. Clean the pod components and contacts as needed to maintain optimal performance.

Step 11: Practice Proper Pod Care

To prevent future burns or damage to your Suorin Air Pod, practice proper pod care. This includes regularly cleaning the pod and its components, replacing the coil and wick as needed, using compatible e-liquids, and allowing the wick to saturate before use. Additionally, avoid overfilling the pod or inhaling too forcefully, as these actions can contribute to burning, leaking, or other issues.

Step 12: Store Your Suorin Air Pod Properly

When not in use, store your Suorin Air Pod in a cool, dry place, away from direct sunlight or extreme temperatures. This can help prolong the life of your pod and prevent damage from environmental factors.

Step 13: Charge the Battery Correctly

Ensure that you charge your Suorin Air Pod battery according to the manufacturer’s instructions. Use the correct charger and avoid overcharging the battery, as this can cause damage and reduce the overall lifespan of the device.

Step 14: Know When to Replace Your Suorin Air Pod

Even with proper care and maintenance, Suorin Air Pods will eventually wear out and require replacement. Be aware of the signs that your pod may need replacement, such as poor vapor production, persistent burnt taste, or visible damage to the pod or its components.

Step 15: Seek Professional Assistance if Needed

If you are unable to repair your burnt Suorin Air Pod or if the issue persists despite your efforts, consider seeking professional assistance. A vape shop or specialist may be able to help you identify the cause of the burn and recommend appropriate solutions or replacement parts.

By following these steps, you can effectively repair a burnt Suorin Air Pod and extend the life of your device. Regular maintenance, proper care, and monitoring of your pod’s performance are essential to preventing burns and other damage. Always exercise caution when working with electronic devices and consult a professional if you are unsure about any aspect of the repair process.

You Can Check It Out To Fix a Microwave That Won’t Heat

Replace the Cartridge

Some Helpful Tips and Suggestions

Here are some helpful tips on how to fix a burnt suorin air pod.

  1. If the air pod is not attached to your vape device, carefully remove it.
  2. If the air pod is still attached to your vape device, turn the device off before removing the base of the air pod so you don’t damage any components.
  3. Try using a clear 2-part epoxy glue around the power pins on both sides of the air pod.
  4. If this is not an option, try using a clear silicone epoxy adhesive gel around the power pins on both sides of the air pod.
  5. If your device will allow it, remove the battery from the base of the air pod to prevent unnecessary damage. This will help if you use heat to remove the air pod.
  6. If you need to use heat, be careful not to burn yourself or damage anything around you (e.g., carpet, curtains). Instead, use a heat gun on the lowest temperature setting that will still allow you to remove most of the epoxy without burning or damaging your device (heat guns are available at hardware stores).
  7. Only use heat for a few seconds at a time, checking the bond every few seconds with either your fingers or tongs so you can stop as soon as the epoxy begins to look pliable. Then, gently pull on one end of the air pod until it detaches from the base.

You Can Check It Out to: Fix Air Bubbles in Candles

Frequently Asked Questions

Why Is My New Suorin Air Pod Burnt?

If you have just bought a new Suorin Air Pod, there is a good chance that it has been burnt. This happens when the battery drains too quickly and causes excessive heat to be generated, which in turn destroys the pod.

To avoid this situation, make sure to charge your pod slowly at regular intervals and only use it when necessary. Additionally, keep your phone away from direct sunlight or other high-heating areas to prevent damage from occurring.

Can You Fix A Burnt Vape Pod?

Unfortunately, it is not uncommon for vapes to burn out. When this happens, the battery may be ruined and there may be damage to the heating element. If you have a burnt vape pod, there are a few things that you can do in order to get it working again:

  1. Try using an alternate battery – if your original battery doesn’t work, try switching to another charged battery of the same type. Make sure that all your batteries are fully charged before attempting this step.
  2. Replace the vaping device – Sometimes getting rid of and replacing the entire device might be the best solution. This will remove any traces of electronic smoke and hopefully fix your issue.
  3. Repair or replace the heating element – If internal parts have been damaged by fire or heat exposure, they may need to be replaced in order to restore functionality. If this isn’t possible or feasible, repairs on heating elements might involve disassembling them completely and re-attaching them correctly; typically requiring professional assistance.

Is It Bad To Hit A Burnt Vape?

Absolutely not! In fact, there are some benefits to hitting a burnt vape – for one, it can clear out the atomizer quickly and effectively. Additionally, it can help to prevent future fires by breaking down residues that may cause spontaneous combustion. So, if you’re burning through your e-liquid quickly and your vape is starting to give you trouble, give this technique a try!

Why Is My Coil Burning After 1 Day?

If you’re experiencing a coil burning after 1 day, there are likely some things that you can do to troubleshoot and address the issue. First, be sure to take your device apart and check for any debris or clogging in the atomizer. If this is not the case, then it may be necessary to clean the coils using an electronic cigarette cleaner or q-tips with alcohol. If cleaning doesn’t work, it may be necessary to replace your coil(s).

If all of these measures fail to resolve the issue, then it might be time for a new device altogether.

Conclusion

There are a few ways to fix your burnt Suorin Air Pod. First, you can try the microwave method. Put your pod in a shallow dish and fill it with water so that the pods don’t touch any part of the microwaves themselves. Microwave on high for one minute or until you see steam rising from inside the device.

Try the Microwave Method

If that doesn’t work, it may be time to replace the coil. We hope you found this blog post on how to fix a burnt suorin air pod informative and helpful! Let us know if we can help with anything else or answer any questions that might arise from reading this article.

You Can Check It Out to: Fix Pink Screen on Hp Laptop

Leave a Comment