How to Fix a Bent Fender

You’re cruising down the street in your beloved car when you hear a loud pop. You glance in the mirror and see that your Fender is bent. Now what? Don’t worry, and we’ll show you how to fix it yourself. Then, we’ll walk you through the steps so that you can get your car back on the road in no time. Keep reading for all the details.

How to Fix a Bent Fender

If you’ve ever driven a car with a bent fender, you know how annoying it can be. Not only does the appearance suffer, but the car is also more prone to getting dings and scratches. This blog post will show you how to fix a bent fender using basic tools and supplies.

Summary: Fixing black well water requires several steps. Use a water filter and have your well inspected to start, then test the water and clean or replace your pipes. Shock your well if necessary and add an air injection system, and install a water softener to help. Use bleach for toughest spots, flush your pipes, and find an alternative water source as a last resort.

19 Easy Steps on How to Fix a Bent Fender

1. Assess the Damage:

Before attempting any repairs, evaluate the extent of the damage to the bent fender. Determine whether the fender can be repaired or if it needs to be replaced entirely. Take note of any paint damage, dents, or creases that may require additional attention.

2. Gather Necessary Tools and Materials:

To fix a bent fender, you will need the following tools and materials:

  • Adjustable wrench or socket set
  • Rubber mallet or body hammer
  • Wood block or dolly
  • Heat gun or hairdryer
  • Sandpaper (80, 180, and 320 grit)
  • Body filler
  • Primer and paint (matching your vehicle’s color)
  • Paintbrush or spray gun
  • Clean rags or paper towels
  • Automotive masking tape
  • Safety goggles and gloves

3. Prepare the Work Area:

Select a well-lit, well-ventilated work area, such as a garage or driveway. Clear the area of any debris or obstacles to ensure a safe and efficient workspace.

4. Remove the Bent Fender:

Using an adjustable wrench or socket set, carefully remove the bolts or screws securing the bent fender to the vehicle. Gently pull the fender away from the vehicle, taking care not to damage any surrounding components.

5. Apply Heat to the Bent Area:

Put on safety goggles and gloves, and use a heat gun or hairdryer to apply heat to the bent area of the fender. This will help soften the metal and make it more pliable, allowing for easier manipulation.

6. Straighten the Fender:

Using a rubber mallet or body hammer and a wood block or dolly, carefully tap the bent area of the fender to straighten it out. Work gradually, applying gentle pressure and repositioning the block or dolly as needed to achieve the desired shape.

7 . Check the Fender’s Alignment:

Periodically check the alignment of the fender by holding it up to the vehicle or using a straight edge as a guide. Make any necessary adjustments to ensure the fender aligns properly with the vehicle’s body lines.

8 . Sand the Damaged Area:

Once the fender has been straightened, use 80-grit sandpaper to remove any paint or surface imperfections from the damaged area. This will create a smooth surface for the application of body filler, primer, and paint.

9 . Apply Body Filler (If Needed):

If there are any remaining dents or imperfections in the fender after straightening, apply body filler according to the manufacturer’s instructions. Smooth the filler with a plastic spreader and allow it to dry fully before sanding.

10. Sand the Body Filler:

After the body filler has dried, use 180-grit sandpaper to smooth the filler and blend it into the surrounding fender surface. Gradually work up to 320-grit sandpaper for a smoother finish.

11. Clean the Fender:

Using a clean rag or paper towel, wipe down the fender to remove any dust or debris from sanding. Ensure the surface is clean and free of contaminants before proceeding with primer and paint.

12. Mask Off Surrounding Areas:

If you will be painting the fender while it is still attached to the vehicle, use automotive masking tape to protect any surrounding areas that should not be painted.

13. Apply Primer:

Apply a coat of primer to the repaired area, following the manufacturer’s instructions for proper application and drying times. The primer will help the paint adhere to the fender and provide a more professional finish.

14 Apply Paint:

Once the primer is dry, apply paint to the repaired area using a paintbrush or spray gun. Be sure to use paint that matches your vehicle’s color to ensure a seamless repair. Apply multiple thin coats of paint, allowing each coat to dry fully before applying the next. This will help to achieve a smooth and even finish.

15. Apply Clear Coat (Optional):

For added protection and a glossy finish, apply a clear coat to the repaired area once the paint is dry. Follow the manufacturer’s instructions for proper application and drying times.

16. Reattach the Fender:

Once the paint and clear coat have fully dried, carefully reattach the fender to the vehicle using the bolts or screws that were previously removed. Ensure the fender is properly aligned with the vehicle’s body lines and securely fastened.

17. Remove Masking Tape:

If you applied masking tape to protect surrounding areas, carefully remove the tape once the paint and clear coat have fully dried. Be cautious not to damage the fresh paint during tape removal.

18. Inspect the Repair:

Examine the repaired fender to ensure it is properly aligned, securely fastened, and free of any visible defects or imperfections. The paint should be smooth and match the surrounding vehicle color.

19. Test Drive the Vehicle:

Take the vehicle for a test drive to ensure the repaired fender does not interfere with the vehicle’s performance or create any unusual noises. Make any necessary adjustments to the fender’s alignment or attachment, as needed.

By following these steps, you can successfully repair a bent fender and restore your vehicle’s appearance and functionality. The repair process requires patience, attention to detail, and the appropriate tools and materials, but a well-executed repair will provide a durable and visually pleasing solution. Regular vehicle maintenance and inspections can help prevent future damage and ensure your vehicle remains in top condition for years to come.

Some Helpful Tips and Suggestions

Here are some tips and suggestions on how to fix a bent fender.

1. Take pictures of your wheel and wheel well. It will be useful when you go to replace the Fender.

Take Pictures of Your Wheel

2. Removing the wheel is always a good option, but it’s unnecessary in most cases. Make sure you have enough time and patience to remove the wheel and tire before continuing with this task. This will save you time and prevent possible damage to other parts of your wheel well.

3. This is done with the car still on the ground, so finding something sturdy enough to lift up one side of the car high enough for you to slip that fender into-a car jack works great. Even two jacks making a big X will do.

4. The process is pretty simple, but you must be careful not to over bend the Fender back into place. It’s better to take your time and move it slightly at a time than snapping the metal by forcing it back too quickly.

5. Removing and replacing your Fender is a pretty straightforward process. To remove the front or rear Fender, you will first need to remove the screws from the wheel well.

6. After removing those screws, check how much more you want to take off by putting your hands on it and pushing it down as far as possible until you hear a ‘clunk.’ This will give you an idea of how much to take off.

7. After you’ve found the right amount to take off, use a Sawzall or air cutter to cut through it, then twist your pliers into where the seam of your Fender meets with the hood of your car. You can then pry it out using this or by putting two screwdrivers and twisting them both in opposite directions.

Few Things to Consider When Fixing a Bented Fender

1. The first and most important thing to consider is that if you do not have the proper knowledge or tools, this may make your Fender even worse than before. This job requires complete focus by the mechanic; any distraction could cause serious damage to the car.

2. If you attempt to fix the Fender yourself, you need to purchase supplies. You can buy body filler from an auto parts store or just use boat putty for this job. Masking tape and a spray can of high-temperature paint also be required if your Fender has been previously painted. If the Fender is not painted, it does not need to be painted.

3. The first step is to pop the car’s hood, undo any bolts holding the Fender into place, and then take it off your car. The entire Fender has to be removed because all four sides have to be checked out carefully if there are problems with the Fender.

4. Next, you need to inspect the Fender for any problems to be addressed before fixing them. You want to look for things like cracks or holes, which will need extra attention. There may also be dents in the Fender, so you may have to correct those first with a hammer and dolly before moving on.

5. After filling the dent with a filler, use a body grinder to smooth out the filler and flush it with your Fender. If the Fender is new enough, you could consider painting over it, but this is not necessary.

Use a Body Grinder

6. Fenders are tricky on cars because of their design, and many people have had issues getting them back into place after they’re repaired. This is why it’s essential to have the entire Fender removed before trying to fix it so that you can see any problems with the support braces underneath.

How Much Does It Cost to Fix a Bent Fender

The cost of hiring a professional to fix your Fender can vary widely depending on the severity of the damage and where you live. The average price for such a job is around $300-$500, but you might find an excellent deal for less than $200.

Trying this type of repair yourself will save you money in the long run, but it’s essential to keep in mind that this is a very involved task, and the average DIY-er may find more frustration than satisfaction at the end of it. It’s probably around 300-500 bucks to have someone fix it for you if you don’t know what you’re doing. If you do, expect about 200 because buying a new fender is not worth it.

You Can Check It Out to: Fix Flexible Resin

Frequently Asked Questions

What Liquid Can Melt Plastic?

There are many liquids that can melt plastic, but the most common ones include gasoline, diesel fuel, kerosene, and oil. These types of liquids heat up quickly and have a high vapor pressure which means they contain a lot of energy when in contact with plastics.

When these liquids come into contact with plastic items like parking meters or water bottles, they seep through the cracks and pores in the plastic to reach the liquid inside. This causes the plastic to soften and eventually break down due to hydrolysis (the chemical reaction that breaks down molecules).

It is important to remember that not all plastics will react with all types of liquid fuels; it’s best to test out different kinds before you attempt to deface any property!

Can You Unbend A Fender?

Not really! The word “unbend” probably comes from the old English phrase “unin bendan”, which means to make something flexible again. To unbend a fender, you would likely need some strong tools such as pliers or wire cutters, and even then it might be tricky since the metal is usually very stiff. In general, unless you have professional equipment at your disposal, it’s not really possible to unbend a fender by yourself.

Can You Bend A Fender Back In Place?

No, you cannot bend a Fender back in place. Fender guitars are designed to be played with the “back” of the guitar facing down, so that the strings run across the back of the neck rather than through the top. If you try to bend the back of a Fender guitar in any way, you will likely damage it beyond repair.

Does Alcohol Dissolve Plastic?

it appears that alcohol does not dissolve plastic effectively. In fact, some reports suggest that it may actually increase the amount of plastic in water runoff. This is because when you drink alcoholic beverages, your body releases enzymes that break down polysaccharides into smaller fragments that can be easily absorbed by aquatic life.

As a result, drinking alcohol while Fishing or Kayaking could have negative consequences for marine environments and our own ecosystems. It’s important to remember that any liquid released from recreational equipment should not be consumed as it could potentially cause harm to wildlife and habitats.


A fender bender can happen to anyone, and when it does, you’ll want to know how to fix a bent fender. The good news is that fixing a bent fender isn’t difficult, but it will take some time and patience.

Although it may seem daunting, fixing a bent fender is a relatively straightforward process that can be completed in just a few hours. With the right tools and instructions, you can have your car look new again. Have you tried repairing a bent fender before? If not, what are you waiting for? Get started today and see how easy it can be.

You Can Check It Out to: Use Auto Body Repair Tape

Leave a Comment