How to Fix Uneven Concrete Around Pool

If you have a pool, then you know that one of the most important things to do is keep it looking great. This includes ensuring that the concrete around the pool is smooth and even. If it’s not, then you’re going to see a lot of ugly cracks and bumps. Luckily, there are ways to fix this without spending much money.

How to Fix Uneven Concrete Around Pool

In this blog post, we’ll show you how to fix uneven concrete around pool. So whether you’re preparing for the summer swim season or just want to make your pool look its best, follow these steps to get it done quickly and easily.

Summary: Maintaining the concrete around your pool is important to ensuring a safe and beautiful pool area. If the concrete is uneven, you can easily fix it with a few simple steps. First, use a hammer and chisel to remove any loose concrete. Then fill in any gaps with mortar or self-leveling compound. Finally, use a trowel to smooth out the surface for an even finish. With these simple steps, you can have your uneven concrete around the pool fixed in no time.

What Causes Uneven Concrete Around Pool?

There are a few reasons your concrete may be uneven around your pool. It could be due to the ground underneath settling, the pool settling, or poor craftsmanship when the concrete was originally poured. Regardless of the cause, you’ll want to fix any uneven areas as soon as possible to avoid further damage and ensure that your pool is safe and stable.

One of the most common causes of uneven concrete around pools is settlement. This can happen when the ground underneath the concrete begins to shift or settle. This can be due to a number of factors, including changes in the weather, soil erosion, or even just the natural settling that occurs over time. If you notice any settling, it’s important to address it as soon as possible. 

Otherwise, you risk the concrete cracking or breaking, which can be both unsightly and dangerous. Another common cause of uneven concrete around pools is the pool itself settling. This was usually due to poor craftsmanship when the pool was originally installed. If the foundation wasn’t properly compacted or the pool wasn’t level when it was poured, it can settle over time and cause the concrete around it to become uneven. 

This is especially common in inground pools, which are more likely to settle than above-ground pools. If you notice any unevenness in your concrete, it’s important to have it repaired as soon as possible. Otherwise, you risk further damage and potential injuries.

Step by Step Guidelines on How to Fix Uneven Concrete Around Pool

Step 1: Inspect the Damage

First, you must inspect the damage and see how bad it is. If the concrete is only slightly uneven, you might be able to fix it yourself. But if the damage is severe, you might need to call a professional. For that, you can get free quotes from local concrete repair companies.

You Must Inspect the Damage

Step 2: Clean the Area

Once you have inspected the damage, the next step is to clean the area. You need to remove all the dirt, debris, and stains from the concrete. Otherwise, it will be difficult to fix the uneven surface. You can use a power washer or a garden hose to clean the area.

Step 3: Fill in the Cracks

If there are any cracks in the concrete, then you need to fill them in. Otherwise, the uneven surface will only get worse. You can use a concrete repair kit to fill in the cracks. Just follow the instructions on the kit. You can also use a putty knife to fill in the cracks.

Step 4: Sand the Area

After you have filled in the cracks, the next step is to sand the area. This will help to create a smooth surface. You can use a power sander or a hand sander. Just make sure that you sand evenly. This is very important to avoid creating more unevenness.

Step 5: Apply a Concrete Leveler

Once you have sanded the area, the next step is to apply a concrete leveler. This will help to fill in any low spots. First, mix the leveler according to the manufacturer’s instructions. Then, use a trowel to apply it to the area. You want to ensure that you smooth it out as much as possible.

After the leveler has dried, you will need to sand the area again. This time, you want to use finer grit sandpaper. Once you have finished sanding, you should have a smooth surface.

If there are still some low spots, you can repeat the process. Just keep in mind that it may take several applications to get the results you want.

Step 6:  Apply a Concrete Sealer

Once you have a smooth surface, the next step is to apply a concrete sealer. This will help to protect the surface from stains and other damage. To do that, simply follow the instructions on the sealer you purchase. In most cases, you will need to apply two coats of sealer, allowing each coat to dry completely before applying the next.

Once you have applied the sealer, your new surface should be ready to enjoy! Be sure to wait at least 24 hours after applying the sealer before using the surface, however. This will give the sealer time to cure and provide maximum protection.

Apply a Concrete Sealer

5 Effective Methods to Fix Uneven Concrete Around Pool

Method 1: Use a Self-Leveling Product

You can use a self-leveling product to fix your problem. This is an easy way to level out your concrete and can be found at any hardware store. This is the most common method to fix this problem.

Method 2: Add Sand to the Area

If your concrete is too low, add sand to the area to level it. This is an easy way to fix your problem without buying a self-leveling product. Many people use this method because it is less expensive.

Method 3: Use a Cement Mix

If you have more experience, you can mix your cement to fix the problem. This is a great way to save money and will last longer than the self-leveling product. You can find cement mixes at any hardware store.

Method 4: Use a Concrete Patch

Using sufficient water, mix the concrete patch well, then apply it to the area with an old trowel. After application, use a new trowel to level out the concrete patch. Let the concrete patch dry for at least 24 hours before walking or swimming.

Method 5: Use a Concrete Leveler

If you want a fast and easy way to fix your problem, then using a concrete leveler is the best solution. You can find these at any home improvement store, and they are very easy to use. All you need to do is pour the leveler into the low spots and wait for it to harden. Once it dries, you will have a perfectly level concrete surface.

If you have a large uneven area, then you may want to consider hiring a professional to do the job for you. This is the best way to ensure that the job is done right and that your concrete will look great for years to come.

Using a Concrete Leveler Is the Best Solution

Safety Precautions You Need to Know Before Fixing Uneven Concrete Around Pool

Working around pools can be dangerous, and it’s important to take the necessary safety precautions before beginning any type of repair. Here are 11 things you need to know before fixing uneven concrete around your pool:

1. Always wear proper protective gear when working around pools. This includes gloves, goggles, and a face mask to avoid inhaling harmful chemicals.

2. Never fix uneven concrete while the pool is full of water. This can create a dangerous situation where you could slip and fall into the pool.

3. Ensure the area around the pool is well-ventilated before starting any repairs. This will help avoid fumes from the chemicals used to fix the uneven concrete.

4. Always follow the manufacturer’s instructions when using any chemical product. This will help to ensure your safety and that the repairs are done correctly.

5. Be sure to wear old clothes that you don’t mind getting dirty or ruined.

6. It’s important to have all the necessary tools before beginning any repairs. This includes a chisel, hammer, screws, nuts, and washers.

7. Always make sure the surface you’re working on is level before starting any repairs. An uneven surface can make it challenging to work and cause the repairs to be less effective.

8. It’s important to work slowly and carefully when repairing uneven concrete. This will help to avoid any mistakes that could make the repairs more difficult.

9. Once the repairs are complete, it’s important to clean up the area thoroughly. This includes removing any debris and washing away any chemicals that were used during the repair process.

10. Ensure the area around the pool is arid before allowing anyone to use the pool.

11. Never leave any tools or other objects around the pool area. This can create a tripping hazard and lead to someone drowning if they fall into the pool.

Always Wear Proper Protective Gear


Pool concrete leveling is a process that can fix uneven concrete around your pool. This is an important step in ensuring the safety of your swimming area and should be done by a professional.

If you read the whole article on how to fix uneven concrete around pool, then you know the different methods that you can use to fix this problem. You also see the safety precautions you must take before starting any repairs. So, what are you waiting for? Go ahead and get started on fixing your uneven concrete today!

You Can Chack It Out Fix a Pool Screen

Leave a Comment