How to Fix Transmission Over Temp Jeep

Are you the proud owner of a Jeep? If so, it’s important to ensure your vehicle is always kept in top condition. One issue that may come up for Jeep owners is their transmission overheating. This can be caused by various things and can lead to costly repairs if not addressed quickly and properly. Don’t worry – with some basic knowledge; you can easily fix an overheating transmission yourself!

How to Fix Transmission Over Temp Jeep

Fortunately, there are some simple steps that you can take to lower the temperature of your vehicle’s transmission. In this blog post, we’ll show you just how easy it can be to fix transmission over temp in your Jeep – without breaking the bank or spending hours trying to diagnose the problem yourself! 

This blog post will give you everything you need to know about how to fix transmission over temp jeep.

What Will You Need?

Before you start the process of fixing your transmission, you’ll need to have a few things on hand.

  1. A coolant/transmission fluid
  2. A funnel or other tool to pour the coolant into the transmission
  3. An oil filter and wrench
  4. A new gasket for your transmission pan
  5. A torque wrench
  6. A jack and jack stands (or ramps) for lifting your Jeep safely
  7. An adjustable wrench for removing hoses and fittings in tight spaces
  8. Antifreeze or engine degreaser

Once you have all the tools and supplies.

10 Easy Steps on How to Fix Transmission Over Temp Jeep

Step 1. Lift Your Jeep:

Use a jack and stands to lift your Jeep off the ground. This will give you enough space to get beneath it. Make sure you lift the vehicle evenly so you don’t create any stress points or weak spots. If lifting your Jeep is out of the question, you can also use ramps to raise it up instead.

Use a Jack and Stands to Lift Your Jeep

Step 2. Drain the Transmission Fluid:

Once your Jeep is safely elevated, you can drain the old transmission fluid from the pan. Before doing this, make sure to put down a drip pan and some newspaper to protect your work area. Once you’ve drained all of the old transmission fluid, replace the pan gasket with a new one and re-install it onto the transmission case.

Step 3. Replace The Oil Filter:

The oil filter in your transmission should also be replaced during this process. Make sure you use an oil filter wrench to do this, as it will ensure no damage to the filter or the casing. Once your new filter is in place, re-attach the hoses and securely tighten all bolts.

Step 4. Re-fill With Coolant/Transmission Fluid:

Use a funnel to carefully pour coolant/transmission fluid into the transmission until it reaches the full line on the dipstick (or as instructed in your model’s owner’s manual). Make sure that you don’t overfill, as this can cause further damage to your vehicle. It will also help to start the engine and check for any leaks.

Step 5. Start Your Jeep:

Once you’ve completed all of the steps above, it’s time to start the process of fixing transmission over the temp jeep. Put your key in the ignition and turn it until the engine starts. Your Jeep should run smoothly and without any issues.

Step 6. Check For Leaks:

Once your Jeep is running, look underneath to ensure that there are no leaks coming from the transmission or hoses. If you see any signs of leaking, address them immediately by tightening any loose fittings or re-sealing hoses. You can also use an antifreeze or engine degreaser to help identify and remove any leaks.

Step 7. Drive Slowly:

Now that you’ve completed fixing the transmission over the temp jeep, it’s time to get back on the road! However, it’s important that you drive slowly at first to allow the engine and transmission to adjust to their new temperatures before taking on more robust driving conditions. Don’t forget to check your fluid levels periodically.

Check Your Fluid Levels Periodically

Step 8. Monitor The Temperature Gauge:

The temperature of your transmission should remain at a safe level when you’re driving. Monitor the temperature gauge to ensure it doesn’t exceed its recommended levels and take action if it does. If you notice that it’s getting too high, pull over and let the engine cool down before continuing.

Step 9. Check For Any Issues:

If you notice any issues with how your Jeep is shifting or running, make sure to get them checked out right away. Taking care of small problems now can save you from much bigger issues in the future. Additionally, make sure to keep up with regular maintenance and inspections to ensure that your vehicle is running in top shape.

Step 10. Go Out And Enjoy The Ride:

Fixing transmission over a temp jeep isn’t always easy, but it can be done with some patience and diligence! Now that you know how to do this process, there’s nothing stopping you from getting back out there and enjoying the open road. So go out, take your Jeep for a spin, and have some fun!

By following these steps, you should be able to fix transmission over the temp jeep with ease. Just make sure that you take the necessary precautions and safety measures while doing this process, as it can be dangerous if not done correctly.

5 Additional Tips and Tricks

  1. Check the transmission fluid level. If it is low, top off the fluid and make sure to use only transmission fluid approved for your car’s make and model.
  2. Change the transmission filter regularly according to your vehicle’s maintenance schedule.
  3. Avoid racing your engine or driving aggressively because this can cause the transmission to overheat.
  4. Make sure you are using the correct transmission oil for your vehicle by consulting your owner’s manual or a technician at an auto repair shop
  5. Have a mechanic inspect and service your car’s cooling system regularly to ensure optimal performance of the transmission system and prevent its premature failure due to overheating. Doing so may be necessary even if you don’t notice any problems with how your car is shifting.
Using the Correct Transmission Oil

By following these tips and tricks, you can help prevent transmission over the temperature in your Jeep and keep it running smoothly for years to come. 

If you’re still having trouble or notice any other issues with how your car is driving, it’s always best to have a professional mechanic inspect the vehicle to diagnose the issue. Doing so will ensure the safest and most efficient repair for your beloved Jeep. 

5 Things You Should Avoid

1. Ignoring the Warning Signs: If your vehicle has been running hot, don’t ignore it. Pay attention to the temperature gauge and how your Jeep is running.

2. Not Checking Coolant Level: Make sure you check the coolant level in your radiator frequently so that there is always enough for cooling purposes.

3. Skipping Regular Maintenance: Regularly scheduled maintenance can help keep you from having any major issues with transmission over temp on a Jeep.

4. Low-quality Parts: When replacing parts or fluids, make sure to buy quality ones from trusted sources to avoid further damage or problems down the line.

5. Taking Shortcuts: Don’t take any shortcuts when dealing with transmission over temp on a Jeep, as this could lead to more serious problems. Take your time and do things properly to get the best results.

If you are experiencing transmission over temp on a Jeep, it is important to take action quickly to avoid any further damage or expensive repairs down the line. Follow these tips, and make sure to keep an eye out for any warning signs from your vehicle so that you can address them immediately.

What Causes Transmission to Overheat?

There are several common causes of transmission overheating on a Jeep, including:

  1. Low coolant levels or low quality coolant being used.
  2. Worn or damaged parts such as the radiator, gaskets, and seals.
  3. Clogged transmission filters don’t allow oil to flow freely.
  4. Too much fluid in the system.
  5. Not allowing enough time for the transmission to cool down after use.

These issues can all be addressed with regular maintenance, so it’s important not to skip out on this step when caring for your vehicle.

Issues Can All Be Addressed

Additionally, make sure to always buy high quality replacement parts from trusted sources to ensure optimal performance and prevent any further damage from occurring. Taking the time to care for your vehicle properly can help you avoid any transmission over-temp issues and keep your Jeep running smoothly.


Now, you have the tools and knowledge to learn how to fix transmission over temp jeep. As we’ve discussed, the first step is locating the thermostat and ensuring it’s not stuck. Then you’ll want to check your coolant level and top it off if needed. After that, inspect the hoses to make sure they aren’t leaking or clogged, replace any worn out belts, flush and refill your transmission fluid, and finally, change out your transmission filter.

All these steps combined will ensure your Jeep’s transmission is running at its best temperature—so you can enjoy smooth shifting while you’re out on your adventure! It may take time, but following these easy steps will help keep your Jeep running right for many years to come so you can continue exploring with peace of mind.

Hopefully, this post helped provide some clarity and insight when it comes to fixing transmission over a temp jeep. If you’re still having issues, don’t hesitate to contact a professional mechanic who can help identify and address any underlying problems. Good luck!

You Can Check It Out to Fix Transmission Stuck in Gear

Leave a Comment