How to Fix Sagging Ikea Drawers

If you’ve ever had an Ikea dresser, you’re familiar with the issue of saggy drawers. While there isn’t one definitive fix for this problem, a few solutions might work for you. There’s nothing like the satisfaction of assembling furniture from Ikea. However, when your drawer starts to sag soon after assembly, that satisfaction becomes frustrated.

How to Fix Sagging Ikea Drawers

Luckily, there are a few simple ways to fix a sagging Ikea drawer. This blog post will outline a few possible solutions for how to fix sagging ikea drawers, from tightening the screws to using support braces. So whether your drawer is sticking or doesn’t look as flat as it once did, follow these tips, and you’ll be good to go!

Summary: Fixing sagging Ikea drawers is a relatively simple task that can be accomplished in a few steps. Start by adding a few shims and then tightening the screws on the drawer slides. If necessary, replace the slides altogether. You could also use L brackets to reinforce the drawer and secure it more firmly in place.

Additionally, you can check for any other damaged parts that need to be replaced and add some drawer liners for stability. To further prevent your drawer from sagging, you could add a support beam, some weight inside of the drawer or even a lid support at its back side.

What Cause Ikea Drawers to Keep Sagging?

There are a few reasons why your drawers might be sagging, but don’t worry, there are ways to fix it! The most common reason is that the screws attaching the drawer slides to the dresser have come loose. Another possible reason is that the drawer itself is warped. This can happen if the dresser is exposed to excessive moisture or heat. But there are ways to fix it!

10 Ways on How to Fix Sagging Ikea Drawers

1. Add a Few Shims:

If your drawer is sagging, you can try shimming it with a few thin pieces of wood or cardboard. This will prop up the drawer and help keep it level. You can also try using drawer glides, which are small metal strips that you place under the drawer to help keep it level.

2. Tighten the Screws:

If your problem is just a little bit of sagging, you might be able to fix it by tightening the screws. First, open up the drawer and look for any screws that might be loose. Then, tighten them up and see if that helps stabilize the drawer.

3. Replace the Slides:

If your drawer is not closing properly, you might need to replace the slides. This is an easy fix that anyone can do. Just remove the old slides and install new ones in their place.

Replace the Drawer Slides

4. Use L brackets:

If you’re handy with a drill, you can try using L brackets to stabilize your drawer. Just drill some holes in the back of the drawer and screw the L brackets into place. This should help to distribute the weight more evenly and keep your drawer from sagging. Use an upholstery pin or nail to secure the bracket. This will also ensure that you don’t scratch the drawer. Be sure that you put the brackets in the right places so that they can bear the weight of the contents of the drawer.

5. Replace Damaged Parts:

If your drawers have any cracked or damaged parts, it’s time to replace them. This will help ensure that they are sturdy and can hold up to daily use. Ikea sells replacement parts for many of its products, so finding the right ones should be easy.

6. Use Drawer Liners:

Consider using drawer liners if you want to protect your drawers and keep them looking new. This will help to absorb any impact and prevent any damage from happening to your drawers. You can find drawer liners at most home stores or online.

7. Add a Support Beam:

If you have many heavy items in your drawer, you might want to consider adding a support beam. This will help to distribute the weight more evenly and prevent the drawer from sagging in the future. You can purchase a support beam at most hardware stores. First, measure the length of your drawer and cut the beam to size. Then, attach the beam to the underside of the drawer using screws or nails.

8. Use a Drawer Dividers:

If you want to keep your drawer organized, consider using drawer dividers. This will help to keep everything in its place and make it easier to find what you need. You can purchase drawer dividers or make your own out of cardboard or foam core.

Use Drawer Dividers

9. Add Some Weight to the Drawer:

If your IKEA dresser drawer is sagging, you can try to add some weight to the drawer. This will help to hold the drawer in place and prevent it from sagging. You can use items such as books or cans to add weight to the drawer.

10. Add a Lid Support:

If your dresser drawer has a lid, you can add support to keep the lid from sagging. This will help distribute the weight more evenly and prevent the drawer from sagging in the future. You can purchase lid support at most hardware stores. Attach the support to the underside of the drawer using screws or nails.

Some Helpful Tips and Suggestions

  1. Check to see if the problem is with the drawer or the dresser. If the drawer is sagging, it may be because the dresser frame is not level. Try adjusting the feet of the dresser until it is level.
  2. If the drawer is not level, it may be because the glides are not installed correctly. Follow the instructions that came with your dresser to ensure they are installed correctly.
  3. If the drawer is still not level, you may need to add shims to one or more of the corners of the drawer. This will raise the drawer and make it level.
  4. If the drawer is still sagging, it may be because the supports on the dresser are not strong enough. You may need to add additional supports to the dresser or replace the supports that are already there.
  5. If you add weight to the drawer, make sure it is evenly distributed. You don’t want to add too much weight to one side of the drawer and cause it to tilt.
  6. Be careful not to overtighten the screws when attaching the supports. This can strip the threads and make it difficult to remove the support in the future.
  7. If you use drawer dividers, make sure that they are not too tall. Otherwise, they may prevent the drawer from closing all the way.
Add Weight to the Drawer

Frequently Asked Questions

Can I Make My Ikea Dresser More Sturdy?

While it might not be possible to make your Ikea dresser more sturdy, there are a few ways that you can increase its lifespan. One of the most common repairs people make to their furniture is replacing the drawer slides. It’s important to note that these slides should always be lubricated in order to prevent them from sticking and wood splitting. If your dresser doesn’t have drawers, then you may also want to replace the particleboard with something stronger like MDF or plywood. In addition, apply a protective finish every time you refinish or upgrade your furniture so that it lasts longer and resists wear and tear.

Why Do My Drawers Keep Falling?

Drawers can easily fall out of their tracks if they are not properly secured. This is due to the elasticity of drawer slides and the fact that they may no longer be supported by the bottom stop screw. Over time, this can cause them to slip and fall down, making it difficult or even impossible for you to retrieve your clothes.

To prevent this from happening, it’s important to adjust the screws in each drawer every couple of months (or as needed), replace any worn-out slides with new ones, and make sure that there is adequate support on both ends of the slide. You can also try installing a pull string system instead of traditional side pulls so that you don’t have to reach inside drawers when retrieving items.

Why is My Ikea Furniture Wobbly?

Ikea furniture is typically made of particle board and MDF, which are both types of wood products that are often treated with a type of sealant. The sealant is designed to make the wood more resistant to moisture, which is why Ikea furniture can sometimes feel wobbly or unstable.

Sealants are generally safe and effective, but they can also have some unintended consequences. For example, some sealants may cause the wood to become brittle and prone to breaking.

If you’re experiencing problems with your Ikea furniture that you think might be related to the use of a sealant, you should try spraying the affected area with a water and vinegar solution. This mixture will help to break down the sealant and remove any unwanted effects it may have had.

Do You Fix a Crooked Drawer?

Fixing a crooked drawer may not be as simple as it seems. Oftentimes, the mechanics that control the motion of drawers are faulty or worn out and will need to be replaced in order to fix the issue. If you’re unable to do this yourself, then you’ll likely need to call a professional for help.

The good news is that most professionals can replace just about any type of drawer mechanism and usually don’t charge an arm and a leg for their services. They may also require some minimal preparation before starting work so that they know exactly where the problems lie. In some cases, they might also recommend installing new tracks or rails along the edge of your cabinet doors in order to improve stability when open/closed.

Do You Modernize an Ikea Dresser?

Ikea dressers can be a bit of a pain to update, but that doesn’t mean you can’t do it! In fact, many of the updates you might want to make to your Ikea dresser can be done relatively easily with a few common tools and some DIY know-how. Here are a few tips:

  1. Remove the old drawer fronts – If you’re looking to update your Ikea dresser without completely replacing it, first remove the old drawer fronts. This will make it much easier to see what needs to be replaced and how the new drawer fronts will look.
  2. Update the drawer slides – If your dresser has loose or wobbly slides, it’s time for an update. You can replace the old slides with updated versions that are stronger and more stable.
  3. Update the knobs and pulls – If you’re looking for something more special than the basic Ikea knobs and pulls, you can find stylish options that fit your personality on sites like Etsy or Amazon. Just be sure to read reviews first before making a purchase!
  4. Install new hardware – If you’re ready to go all-in on your Ikea dresser update, you might also want to install new hardware like hinges or locks. This will make sure your dresser is secure and won’t move around while you’re trying to get dressed in the morning!

Conclusion

Ikea drawers are a popular, affordable option for storage, but they can often sag over time. This guide provides tips on how to fix sagging Ikea drawers and keep them in good condition. The first step is to remove the drawer from the cabinet and assess what is causing the problem. For example, if the drawer slides in easily and smoothly, the runners or glides need replacing.

Shims may be needed if there is too much space between the drawer and cabinet. In some cases, adjusting screws on either side of the runner can help make them snug and stop them from sagging over time. We hope these tips have been helpful! If you have any other questions feel free to comment below!

You May Also Read: How to Fix a Sagging Porch Roof

Leave a Comment