A recliner cable is a strong, durable cable that is used to connect the various parts of a recliner chair. The cables are made from different materials, such as steel, aluminum, or Kevlar, and they are typically covered with a protective coating to prevent rusting or other damage. Recliner cables are available in different lengths and sizes to find the perfect one for your chair. There are also different types of recliner cables, such as those that are adjustable and those that are not.
If your recliner isn’t reclining, it could be that the cable needs to be fixed. This relatively easy fix can be done in just a few minutes. All you need is a screwdriver and some pliers. In this blog post, we’ll show you how to fix the recliner cable so that it functions like new again. Keep reading to learn more.
Summary: If you are experiencing problems with your recliner, there is a simple solution. Follow these steps to fix the recliner cable: 1. Remove the recliner cover by unscrewing the four screws on the underside. 2. Locate the recliner cable and unplug it from the recliner motor. 3. Inspect the recliner cable for frayed or damaged wires. If there are any broken wires, replace the entire cable. 4. Reinstall the recliner cover and screws. Test the recliner function before you are done.
Can You Repair a Recliner Cable?
Yes, it is possible to repair a recliner cable. However, it is important to note that this is not always the most cost-effective option, and it may be necessary to replace the entire recliner if the damage is extensive. If you are considering repairing a recliner cable, it is important to consult with a professional to ensure that the repair is done properly and safely.
How to Identify That the Recliner Cable Needs to Be Fixed:
If your recliner isn’t working as smoothly as it used to, it might be time to take a look at the cable. Over time, the steel cable inside the chair can stretch, fray, and even snap. If you notice any of these issues, it’s time to replace the cable.
Here Are a Few Signs That Your Recliner Cable Needs to Be Fixed:
- The chair isn’t reclining as smoothly as it used to.
- The chair feels “jumpy” when you recline it.
- You can see fraying or broken wires inside the chair.
- The chair won’t recline at all.
If you notice any of these issues, you need to fix the recliner cable as soon as possible. Luckily, this is a relatively easy repair that you can do yourself.
Materials Required:
- Screwdriver
- Pliers
- Recliner cable (available at most hardware stores)
- Wire cutter (optional)
15 Ways How to Fix Recliner Cable:
1. Unplugging the Recliner
The first step is to unplug the recliner from the wall. This will prevent you from getting electrocuted while working on the chair. If the recliner is battery-operated, you’ll also need to remove the batteries. Next, use a screwdriver to remove the bolts that are holding the footrest to the chair. Once these bolts have been removed, you should be able to pull the footrest out of the recliner.
2. Remove the Cover
To disassemble your recliner, first unplug it from the power source. Then, locate the cover at the back of the recliner and remove it. Doing this will give you access to the inner workings of the recliner. The cover is usually held in place by screws. Use a screwdriver to remove the screws that hold the cover in place. If there are no screws, the cover may be held in place with snaps or Velcro.
3. Locate the Cable
If your recliner’s cable is broken, you will need to replace it. To do this, first remove the cover from the back of the chair. Then, locate the cable that needs to be replaced. The cable is usually located near the back of the chair and is attached to a spring. If you cannot locate the cable, consult your recliner’s owner’s manual.
4. Cut the Old Cable
Use a pair of wire cutters to cut the old cable once you have found it. If the cable is frayed or broken, it must be replaced as old or damaged cables can cause the recliner to malfunction.
5. Attach the New Cable
Now, it’s time to attach the new cable. Take the end of the new cable and insert it into the hole in the back of the handle. Ensure that the notch on the end of the cable is facing up. Then, use a screwdriver to screw the handle back on.
Now, you can reattach the cable to the recliner base. First, insert the end of the cable into the slot on the base. Then, use a screwdriver to tighten the set screws. Make sure that the cable is tight before using your recliner. If your recliner still isn’t working properly, you may need to replace the entire mechanism.
6. Replacing the Entire Mechanism
If your recliner isn’t working right, you might have to replace the whole mechanism. That’s a tougher fix, but you can still do it yourself. You’ll need to buy a new mechanism and follow the instructions that come with it. That should take care of the problem and get your recliner working like new again.
7. Reattach the Back Panel of the Chair
Once you have replaced the recliner mechanism, you will need to reattach the back panel of the chair. Align the back panel with the front of the chair and screw it in place. Make sure that the screws are tight so that the panel is secure.
8. Plug the Recliner Back In
Now, you can plug the recliner back into the wall outlet. Make sure that the cord is not frayed or damaged. If it is, you will need to replace it. Plugging in the recliner will allow you to test it out and see if the repairs worked. If the recliner still does not work, you may need to replace the motor.
9. Test the Recliner
Now, it is time to test the recliner. Sit on it and see if it tilts back. If the recliner doesn’t work, check all the connections to ensure they are tight. Finally, if the recliner still doesn’t work, you may need to replace the cable.
Tips and Warnings on How to Fix Recliner Cable:
Tips:
- Check the cable for any fraying or damage. If there is any damage, you will need to replace the entire cable.
- Make sure the cable is not too tight or too loose. The ideal tension for a recliner cable is about 6 to 8 inches of slack.
- Lubricate the cable with WD-40 or a similar product. This will help the cable move more smoothly and reduce wear and tear.
- If the problem persists, you may need to replace the springs.
Warnings:
- Do not attempt to repair the recliner cable if you are not comfortable with doing so. You could end up damaging the recliner or injuring yourself.
- Always disconnect the power before working on the recliner cable. This will prevent the chair from unexpectedly moving and injuring you.
- Be careful not to over-tighten the recliner cable. This could damage the chair or cause the cable to snap.
- Do not use WD-40 or any other lubricant on the recliner motor. This could damage the motor and void your warranty.
- Do not attempt to repair the recliner if it is under warranty. Contact the manufacturer for assistance.
How Much Does It Cost to Repair a Recliner Cable
The cost to repair a recliner cable will depend on the severity of the damage and whether or not you need to replace the entire cable. Expect to pay between $50 and $100 for the repairs. If you need to replace the entire cable, expect to pay between $200 and $300.
How Long Does It Take to Fix a Recliner Cable:
If you’re lucky, it might only take a few minutes. However, it could take a couple of hours if the problem is more complicated. Time will also vary depending on your experience and comfort level with fixing things around the house.
How Long Should a Recliner Cable Last?
The average recliner has a lifespan of 10-15 years. However, the longevity of your recliner will depend on several factors, such as the quality of the materials used, How often you use it, and how well you take care of it. One of the most important parts of your recliner is the cable. The recliner cable is what allows you to adjust the backrest and footrest. Over time, the cable can become worn or frayed, which can cause the recliner to become less comfortable or even break.
What Are the Best Quality Recliners Cable?
There are a few things to consider when purchasing a recliner cable. The first is the type of material that the cable is made from. The second is the length of the cable. The third is the price. The type of material that the recliner cable is made from will determine how long it will last. The most common recliner cables are made from nylon, which is a strong and durable material.
However, there are also recliner cables made from steel, which is a more expensive but durable option. The length of the recliner cable will also affect how long it will last. The shorter the cable, the less likely it is to break. However, the longer the cable, the more expensive it will be. The price of the recliner cable will also affect how long it will last. The more expensive the cable, the more likely it is to last longer.
However, the less expensive the cable, the more likely it is to break. When purchasing a recliner cable, it is important to consider all of these factors. The type of material, the length of the cable, and the price are all important factors to consider. By considering all of these factors, you can be sure to purchase a recliner cable that will last for many years.
Frequently Asked Questions
Can You Manually Work an Electric Recliner?
While it is possible to manually work an electric recliner, this may not be the best option for you. By using a power recline chair instead, you will avoid any problems and prolong the life of your furniture. If something does go wrong with your electric recliner, repairs can usually be done easily and without disrupting your daily routine.
Another reason why opting for a power recline over manual operation might be preferable is comfort: Power chairs are designed to conform to the body contours in order to provide maximum comfort while seated. This means that they push less air which makes them more comfortable than manual chairs overall.
Is There a Manual Override for Electric Recliners?
the override settings for electric recliners will vary depending on the make and model of the recliner. However, some common settings that may be overridden include reclining positions, leg height, and angle. If you are unable to find or adjust these settings on your recliner, it may be best to consult with a technician in order to troubleshoot the issue.
Can a Broken Recliner Be Fixed?
A broken recliner may seem like a daunting task, but it is actually quite simple to repair. Before starting any repairs, be sure to unplug the recliner from the wall and remove all of the furniture. You may also need to disconnect the springs if they are damaged.
Once you have isolated all of the pieces, it’s time for some DIY magic! Start by cleaning and coating both sides of each board with a wood sealant or polyurethane spray. Then use a sawtooth hanger or wire brush attachment on an electric drill to clean off any dirt, dust, or debris before applying another coat of sealant.
Be sure to let everything dry completely before moving on to your final step: reattaching springs and bolting back into place using screws and washers provided in your kit.
Why is My Recliner Not Opening?
Recliners are designed to be pulled out from the wall, which is why they may not be opening when you try to pull them out. There could be a number of reasons for this, including a faulty mechanism or a broken cable.
If you’re sure that the recliner is not opening because of a mechanical issue, you should bring it in for repair. If the recliner does not open at all, it might be due to a broken cable. In this case, you should replace the cable.
Conclusion
So there you have it. All you need is a screwdriver, needle-nose pliers, and about 15 minutes of your time. We hope this article on how to fix recliner cables was helpful and that you can now fix your own cables without having to call in a professional. Have any questions or comments? Let us know in the comment section below.