How to Fix Old Dresser Drawers From Falling Out

When dresser drawers start to fall out, it can be a frustrating problem to fix. Fortunately, you can take some simple steps to recover your drawers properly. This blog post will cover the causes of drawer fall-out and how to fix old dresser drawers from falling out. We will also provide some tips on preventing drawer fall-out in the future. So, if you are dealing with this common furniture issue, keep reading for helpful solutions!

Dresser drawers are notorious for falling out of the dresser. So first, remove the drawer from the dresser and use a screwdriver to remove the metal runners from the old drawer. Then, attach new metal runners to the new drawer using screws. After that, reattach the drawer to the dresser, and you’re done! Read on for more information.

How to Fix Old Dresser Drawers From Falling Out

Summary: Before you start, make sure the drawer slides are in good condition and the screws are tight. Use a drill bit that is the same size as the screw and attach the screw to the drawer handle. Hold the drill bit against the screw and push it into the hole until the bit hits the drawer bottom. Then pull the drill bit out and tighten the screw.

What Causes Dresser Drawer to Fall Out?

One of the most common reasons dresser drawers fall out is that the drawer slides have worn out. Over time, the constant opening and closing of the drawer causes the slides to wear down, making them less effective at keeping the drawer in place.

Another reason dresser drawers may fall out is that the drawer itself has become warped or misshapen. This can happen over time due to changes in temperature or humidity or simply from years of use. Whatever the reason, if your dresser drawer is falling out, there are a few things you can do to fix it. In this guide, we have discussed them in detail.

Step by Step Guide: How to Fix Old Dresser Drawers From Falling Out

Step 1: Remove the Drawer

First, you need to remove the drawer from the dresser. To do this, pull the drawer out until it comes free from the dresser. Make sure you have a firm grip on the drawer before you do this, as it can be quite heavy. If you want to, you can set the drawer on a table or other flat surface while you work.

Step 2: Inspect the Runners

Next, take a look at the runners on which the drawer rests. These are usually wood or metal and may be attached to the dresser with screws or nails. If you see any damage to the runners, such as cracks, splits, or breaks, you will need to replace them before proceeding. To ensure a tight fit, it is best to use the same type of runner as the original.

Step 3: Replace Damaged Runners

If you need to replace any runners, remove the old ones and install the new ones in their place. Ensure they are properly aligned before attaching them to the dresser. Once they are in place, you can proceed to the next step. If you want to, you can sand down the runners before attaching them to the dresser to ensure a smooth surface.

Step 4: Inspect the Drawer Slides

The drawer slides are what allow the drawer to open and close smoothly. These are usually metal and may also be attached to the drawer with screws. If the drawer slides are loose, this could cause your drawer to fall out. To fix this, tighten the screws that attach the drawer slide to the dresser. You may need to use a screwdriver or drill to do this. Once the screws are tight, test the drawer to see if it is still loose. If the drawer is still loose, you may need to replace the drawer slides.

Allow the Drawer to Open and Close Smoothly

Step 5: Attach a Drawer Stop Block

The next step is to attach a drawer stop block to the back of the dresser. This will help keep the drawers from falling out when you open them. To do this, measure the width of the dresser and then cut a piece of wood slightly wider than the dresser. Attach the piece of wood to the back of the dresser with screws. If you have a dresser with more than one drawer, you will need to attach a drawer stop block to each drawer.

Step 6: Add L-Brackets to the Drawers

Place an L-bracket at the top of each drawer on the inside. Drill pilot holes and screw the brackets into place. These will help support the drawer’s weight and keep it from falling out. If your dresser drawers are particularly old or worn, you may want to add a second L-bracket in the middle of each drawer for extra support.

Step 7: Add Drawer Pulls

If your dresser drawers don’t have pulls, now is a good time to add them. Drill pilot holes and screw the pulls into place. If your drawers have existing pulls, make sure they are securely attached. If the pulls are loose, you can use a strong adhesive to reattach them.

Step 8: Replace Damaged Drawers

If any dresser drawers are damaged, now is the time to replace them. Simply measure the old drawer and cut a new one to size. Then, attach it using the same method as you used for the other drawers. The only difference is that you may need to use a little wood glue to keep the new drawer in place. If you use wood glue, ensure it is completely dry before putting anything in the drawer.

Measure the Old Drawer and Cut a New One

Step 9: Add Lining Paper

If you want to line your dresser drawers, now is the time to do it. First, cut the lining paper to size and attach it using double-sided tape or spray adhesive. Using fabric, you can either glue it or staple it. Make sure the lining paper or fabric is smooth and wrinkle-free before adding anything to the drawer.

Step 10: Attach the Drawer Fronts

Now it’s time to attach the drawer fronts. If you’re using new drawer fronts, screw them into place using the screws that came with them. If you’re reusing the old drawer fronts, you’ll need to remove the old hardware and reattach the fronts with new screws. Once the drawer fronts are in place, your dresser should look new! If you have gaps between the drawers and the dresser frame, you can use shims to fill them in and make your dresser even more sturdy.

You Can Check It Out To Fix the Drawers of A Dresser

Attach the Drawer Fronts

Some Helpful Tips and Suggestions

  1. If your dresser drawers start to fall out, it’s probably because the drawer slides are worn out. You can buy new drawer slides at most hardware stores.
  2. If the drawer slides are not the problem, then it is likely that the problem is with the drawer itself. Check to make sure that the drawer is not warped or damaged in any way.
  3. If the drawer is in good condition, but the problem persists, then it is likely that the issue is with the dresser itself. Check to ensure that the dresser is level and that all the screws are tight.
  4. If you still can’t figure out the problem, it is time to call a professional. A professional will be able to diagnose the problem and fix it quickly.
  5. If you have tried all these things and the problem persists, it is time to replace the dresser. Sometimes, the only way to fix a dresser is to replace it entirely.
  6. If you are unsure how to replace the dresser, it is best to call a professional. A professional will be able to help you select the right dresser for your home and install it correctly.
  7. If you are still having trouble, it is always best to consult with a professional. A professional can help you find the right dresser for your home and install it correctly.

How to Prevent Drawers From Falling Out?

One of the most annoying things that can happen while you are getting ready for your day is having a drawer fall out and everything inside spill onto the floor. It is a pain to clean up, but it can also be dangerous if you have sharp objects in the drawer. Luckily, there are a few things that you can do to prevent your dresser drawers from falling out.

The first thing that you can do is to check the drawer slides. If they are loose, then they will need to be tightened. You can do this by using a screwdriver to tighten the screws on the side of the drawer. Another thing that you can do is add some felt pads to the bottom of the dresser drawers. This will help to grip the drawer and keep it from falling out.

 You Can Do is to Check the Drawer Slides

If your dresser drawers still fall out, you may need to replace the drawer slides. You can buy new ones at a hardware store or online. Be sure to measure the length of the old slides to get the correct size. Once you have the new slides, you will need to install them by following the instructions that come with them.

You Can Check It Out To Fix Scuffed Dress Shoes

Frequently Asked Questions

Why Do My Drawers Fall Out?

If you are experiencing drawers that fall out, it may be due to a lack of support. This can be caused by an uneven floor or cabinet top, insufficient screws in the door frame, or weak drawer slides. If this is the case and your cabinets are not adjustable, you may need to have them replaced.

Other causes of drawer pull coming loose include over-tightening of screws or plastic washers used under the screw heads; using a wrench instead of fingers when tightening these fasteners so as not to damage them; using pull cords that are too thin, and installing metal knobs without securing them with adhesive first. And finally, check for creaks and groans in the area where your doors meet their frames – if there appears to be undue stress on this joint, then adjustments might need to be made along this stretch.

What Are the Different Types of Drawer Slides?

There are many different types of drawer slides, and it’s important to choose the right one for your needs. If you’re looking for a simple solution that will hide your drawers, then a knuckle-joint slider may be the best option for you. This type of slide uses screws at either end to hold it in place and is generally quite easy to use.

If you need something more robust and permanent, then an electric lock slider might be the answer. This type of slide uses batteries or electricity to keep it securely locked in place so there is no worry about it accidentally moving. It also has an adjustable handle so that you can adjust its angle as needed.

Lastly, if space is not a big issue but stability is key, then a ball-and-socket slider may be ideal for you. These slides have two joints – one at each corner – which allows them to move freely up and down along their track without touching the floor surface below them.

What Kind of Slides Do You Use for Dresser Drawers?

There are a lot of different types of slides that can be used for dresser drawers, but the most common are those that are made of plastic. These slides can be easily removed and replaced when they become dirty or scratched, and they typically fit most dresser drawer sizes. Other types of slides that can be used for dresser drawers include vinyl, metal, and wood. Each of these materials has its own unique properties that make it better suited for specific applications, so it is important to choose the right one for your dresser drawer.

Can You Replace Drawer Slides?

While drawer slides are an essential part of any home improvement project, it may be time to consider replacing them. Drawer slides can wear out over time and become difficult to operate, which can lead to frustration for you and your family. Luckily, there are a number of options available that will improve the functionality of your drawers without having to replace the entire mechanism.

Some common improvements include using sliders made from resilient materials like rubber or plastic. These alternatives provide more cushioning when removing or inserting items in the drawer, making it easier on your arms and wrists. They also tend not to make as much noise as traditional metal slide mechanisms and they’re often less expensive than replacements by a professional contractor.

Conclusion

If your dresser drawers keep falling out, adding a piece of wood or cardboard to the bottom is the easiest solution. This will give the drawer something to grip onto and keep it from sliding out. You can also try adjusting the screws on the runners so that they are gripping the drawer more tightly.

If you’re having trouble getting into tight spaces, you may want to call in a professional for help. By following these tips on how to fix old dresser drawers from falling out, you should be able to fix your dresser drawers and have them working like new in no time!

Leave a Comment