How to Fix Curtain Rod Pulled out Of Wall

There’s nothing more frustrating than trying to fix something and not being able to find the right tool for the job. Or, even worse, having the wrong tool and not knowing how to use it. This is the case when it comes to fixing a curtain rod pulled out of the wall.

How to Fix Curtain Rod Pulled out Of Wall

The good news is that you can fix this problem in no time with a few simple tools. So don’t stress – follow these steps on how to fix curtain rod pulled out of wall.

Summary: First, we use a screwdriver to pry off the old screws that are holding the curtain rod in place. Once the screws are removed, we can then use a hammer and a wrench to remove the old curtain rod. We can then replace the old curtain rod with a new one, and reattach the screws to the wall.

Why Should You Fix Curtain Rod Pulled out Of Wall?

There are many reasons you should fix a curtain rod pulled out of the wall. First, it can be a safety hazard. If the rod is not properly secured, it could fall and injure someone.

Second, a loose curtain rod can damage the wall. Third, the weight of the curtains can cause the screws to work their way out of the drywall, resulting in a costly repair bill.

Third, a sagging curtain rod can ruin the look of your window treatments. Curtains are an important part of any room’s decor, and they should hang evenly for best results.

Finally, a loose curtain rod is simply an annoyance. It isn’t easy to open and close curtains when the rod is not securely in place. It is important to fix a pulled-out curtain rod as soon as possible for all of these reasons.

Things You’ll Need

  • Hammer
  • Phillips head screwdriver
  • Curtain rod brackets
  • Screws
  • Wall anchors (optional)

How to Fix Curtain Rod Pulled out Of Wall Step by Step Guide

Step 1: Remove the Screws that Hold the Rod in Place

Start by removing the screws that hold the rod in place. There will be two screws holding the rod up – one on each end in most cases. Use a screwdriver to remove these screws and set them aside. Next, pull down the rod and remove the old curtain. Set it aside for now.

Remove the Screws

Step 2: Pry Off the Decorative Cover at The Top of The Rod

Once the screws have been removed, you will need to pry off the decorative cover at the top of the rod. This cover is usually made of metal or plastic and is held in place with small clips. Use a flathead screwdriver or a butter knife to pry off the cover gently. You may need to remove the decorative ball that is inside the cover.

Step 3: Pull The Rod Out

With the screws removed and the cover pried off, you should be able to pull the rod out of the wall. If it is stuck, you may need to wiggle it to get it free. Once the rod is out, you can remove the wall anchors. To do this, insert a screwdriver into the anchor and twist. This will cause the wings to fold in on themselves, and you should be able to pull it out of the wall.

Step 4: Inspect The Wall for Damage

After removing the rod, check the wall for damage. If the screws were removed without damaging the wall, you should be able to re-insert the screws and re-attach the cover. However, if the wall is damaged, you may need to patch it before re-inserting the screws.

Step 5: Patch Any Holes or Cracks in The Wall

If the wall is damaged, you will need to patch any holes or cracks before re-inserting the screws. Start by filling any holes with spackle or putty. If there are any cracks, you may need to use a bit of glue or tape to hold them together. Once the holes and cracks are filled, give the area time to dry.

Step 6: Re-Insert the Screws and Re-Attach The Cover

Once the dry area, you can re-insert the screws and re-attach the cover. Start by screwing one end of the rod into place. Then, stretch the rod to the other side of the wall and screw it into place. Finally, re-attach the cover.

Step 7: Hang The Curtains

Now you can hang the curtains. Start by attaching the hooks or clips to the top of the curtains. Then, stretch the curtains across the rod and secure them in place.

Hang the Curtains

Now that you know how to fix curtain rod pulled out of wall, you can easily fix the problem yourself. Just follow the steps outlined above, and you will be able to get your curtains back up in no time.

How Do You Reinforce a Curtain Rod Bracket?

One way to reinforce a curtain rod bracket is to use metal L-brackets. You will need two L-brackets for each bracket you are reinforcing. To install the L-brackets, first, remove the screw holding the bracket in place.

Next, position the L-bracket so that one leg is flush against the wall and the other leg is flush against the side of the bracket. Drill a hole through both legs of the L-bracket and into the wall. Screw the L-bracket into place.

Repeat this process for the other side of the bracket. Now your curtain rod bracket is stronger than ever!

How Do You Support the Middle of A Curtain Rod?

There are two ways to support the middle of a curtain rod. One way is to use a center support bracket. This bracket attaches to the wall and provides extra support. Another way is to use a double curtain rod. This rod has two rods connected in the middle, providing additional support.

Finally, you can also use a tension rod. These rods are designed to be installed without brackets or other hardware. Instead, they rely on tension to stay in place. This makes them ideal for lighter curtains or for areas where you don’t want to damage the walls with holes for brackets.

Regardless of which method you choose, supporting the middle of your curtain rod will help to prevent sagging and ensure that your curtains hang correctly.

Frequently Asked Question

Can You Reuse Anchor Holes?

If the holes for the curtain rod were drilled properly, you should be able to reuse them. If not, you will need to drill new holes. Regardless of whether you reuse the old holes or drill new ones, make sure that the wall anchors are strong enough to support the weight of the curtain rod.

Can You Take Screws out Of Anchors?

If the screws are still in the anchors, you can try to remove them with a screwdriver. If they’re not in the anchors anymore, you’ll need to remove them and then reattach the screws.

Screws Are Still in the Anchors


As you can see, fixing a curtain rod pulled out of the wall is not as difficult as it may seem. With just a few simple tools and some patience, you can have your curtains hanging beautifully once again in no time at all. Have you tried these steps to fix your curtain rod?

If not, give them a try and let us know how they worked for you in the comments section below. Thanks for reading our post about how to fix curtain rod pulled out of wall.

You May Also Read: How to Fix Dart Holes in Wall

Leave a Comment