How to Fix a Staple Gun Spring

Do you find yourself in a bind when your staple gun spring breaks or gets worn out? Have no fear, because we’ve got you covered! With just a few easy steps, you can easily replace that broken staple gun spring and be on your way to getting all kinds of projects completed in no time.

How to Fix a Staple Gun Spring

Not only will we provide you with detailed, step-by-step instructions on how to fix a staple gun spring, but we’ll also give you the tools needed so that all the hard work is done for you. So grab those supplies and let’s get started – fixing that troublesome situation is simpler than ever!

Tools and Materials You Will Need to Fix a Staple Gun Spring

  1. New staple gun spring
  2. Screwdriver
  3. Pliers
  4. Safety glasses
  5. Replacement staples (optional)
  6. Work gloves (optional)
  7. Clean cloth
  8. Lubricant spray (optional)

Step-by-step Guidelines on How to Fix a Staple Gun Spring

Step 1: Disassemble the Staple Gun

The first step in fixing a staple gun spring is to disassemble the staple gun itself. This may vary slightly depending on the model of your staple gun, but generally, this involves removing screws or clips that hold the two halves of the staple gun together. Once you’ve taken apart the gun, carefully place all the pieces in a safe and organized location.

Step 2: Remove the Old Spring

Next, you’ll need to remove the old spring from the staple gun. This will likely involve using pliers to carefully pull out the old spring from its designated spot. Be sure to do this gently and with caution – you don’t want any accidents. Removing the old spring may also reveal any extra debris or buildup that could be causing issues with your staple gun. Take this opportunity to clean out any gunk and dirt that you find.

Step 3: Insert the New Spring

Now it’s time to insert the new spring into your staple gun. Double-check that the new spring is compatible with your specific staple gun model before inserting it. You may need to use pliers again to help maneuver the spring into place. Once inserted, make sure that the new spring is securely in place. This is also a good time to inspect and clean any other parts of the staple gun that may need attention.

Use Pliers Again to Help Maneuver

Step 4: Reassemble the Staple Gun

With the new spring securely in place, it’s time to reassemble your staple gun. This involves putting all the pieces back together in their respective spots and tightening any screws or clips that hold everything together. Once the staple gun is fully assembled, give it a test run to make sure everything is working correctly. If not, double-check your steps and make sure the spring is properly inserted.

Step 5: Optional – Lubricate and Replace Staples

If you want to ensure that your staple gun continues to work smoothly, you can use a lubricant spray on the moving parts of the gun. This will help reduce friction and keep your staple gun functioning properly for longer periods. Additionally, if you notice that your staples are getting jammed or not firing correctly, it may be time to replace them with new ones.

Following these simple steps, you can easily fix a staple gun spring and get back to tackling all your DIY projects. Remember to always handle tools and equipment with caution and use proper safety gear when working on any repair project. Happy stapling!

Additional Tips and Tricks to Fix a Staple Gun Spring

1. If your staple gun spring is stuck or not responding, try using a lubricant to loosen it up. Apply the lubricant around the spring and let it sit for a few minutes before trying again.

2. Check for any debris or jammed staples inside the staple gun that may be causing issues with the spring. Use compressed air or a small tool to remove any obstructions.

Check for Any Debris or Jammed Staples

3. If the spring is damaged or broken, you can replace it with a new one. Most staple guns come with replacement springs included, but you can also purchase them separately at hardware stores or online.

4. When replacing the spring, make sure to properly align it with the other components of the staple gun to ensure smooth operation.

5. Keep your staple gun clean and well-maintained to prevent any future issues with the spring. Regularly remove debris and lubricate moving parts to keep it in good condition.

6. If you are unable to fix the spring yourself, consider taking it to a professional for repairs or purchasing a new staple gun if the cost of repair is too high.

7. It’s always a good idea to read the manufacturer’s instructions and follow proper safety precautions when attempting to fix any tool, including a staple gun.

8. Some staple guns have adjustable power settings that can affect the tension of the spring. Experiment with different power levels if you notice issues with the spring after using your staple gun.

9. If you are still having trouble with your staple gun spring, reach out to the manufacturer for troubleshooting tips, or consider joining online forums or communities for DIY enthusiasts for additional advice.

10. Remember to always be cautious when handling a staple gun and never point it at yourself or others. Ensure that the safety mechanism is engaged when not in use to avoid any accidents.

11. Lastly, don’t get discouraged if it takes a few tries to fix your staple gun spring. With patience and the right techniques, you can easily get your staple gun back in working condition and continue with your projects. 

Following these additional tips and tricks can help you fix your staple gun spring and ensure its smooth performance in the future. Remember to always prioritize safety and proper maintenance to avoid any issues with your tools. Happy stapling!

Precautions Need to Be Followed for Fixing a Staple Gun Spring

1. First and foremost, ensure that the staple gun is switched off or unplugged from its power source before attempting to fix the spring. This will prevent any accidental firing of staples during the repair process.

2. It is recommended to wear appropriate safety Gear while fixing a staple gun spring. The spring can be under tension and may cause injury if not handled carefully.

Wear Appropriate Safety Gear

3. Before starting the repair, gather all necessary tools and replacement parts. This will save time and prevent any unnecessary interruptions during the process.

4. It is important to refer to the manufacturer’s manual or online resources for specific instructions on how to fix a spring for your particular staple gun model.

5. Take note of the current position of the spring before removing it to avoid confusion during reassembly. Take pictures or make diagrams if necessary.

6. Be gentle and patient while handling the spring. It is delicate and can easily bend or break if mishandled.

7. Clean any debris, dust, or old grease from the spring and its surrounding parts before installing a new one.

8. Use appropriate lubricants recommended by the manufacturer to ensure smooth functioning of the spring.

Following these precautions will not only ensure a successful repair but also guarantee the safety of the person performing the repair. It is always better to take extra precautions than to risk an injury or further damage to the staple gun.  So, make sure to follow these steps carefully and with caution. Happy stapling! 

Frequently Asked Questions

What Causes a Staple Gun Spring to Break or Wear Out?

A staple gun spring may break or wear out due to regular use, improper storage or mishandling of the tool, or corrosion from exposure to moisture or chemicals. Additionally, using the wrong size or type of staples can put extra strain on the spring and cause it to break prematurely.

How Do I Know if My Staple Gun Spring Needs to Be Replaced?

There are a few signs that may indicate your staple gun spring needs to be replaced. These include difficulty or inability to fire staples, inconsistent or weak firing power, or visible damage to the spring itself. If you notice any of these issues, it’s best to replace the spring before it completely breaks.

Can I Replace a Staple Gun Spring Myself?

Yes, it is possible to replace a staple gun spring yourself. However, it can be a tricky process and may require specialized tools or knowledge depending on the specific make and model of your staple gun. It’s important to carefully read the manufacturer’s instructions and follow safety precautions when attempting to replace the spring.

Are There Any Maintenance Tips to Help Prolong the Life of My Staple Gun Spring?

Yes, there are a few things you can do to help prolong the life of your staple gun spring. Regularly cleaning and lubricating the tool can prevent buildup of debris or rust that can damage the spring. Additionally, storing the staple gun in a dry environment and using proper staples for the job can also help prevent unnecessary strain on the spring.

 Lubricating the Tool Can Prevent Buildup of Debris


All in all, knowing how to fix a staple gun spring is an important skill for anyone who uses this tool. By understanding the causes of spring breakage and following maintenance tips, you can help prolong the life of your staple gun and avoid unexpected malfunctions. And in case replacement is necessary, being able to do it yourself can save time and money. Remember to always prioritize safety when working with any tool, including staple guns. Happy stapling! 

Leave a Comment