How to Fix a Microwave Door Switch

If your microwave isn’t heating up, there’s a good chance the door switch is broken. The door switch might be to blame if your microwave isn’t working. Or, if you’ve ever tried to use your microwave and found that the door wouldn’t close, you know how frustrating it can be.

How to Fix a Microwave Door Switch

This guide will show you how to fix a microwave door switch without calling in a technician. It’s a simple repair that only takes a few minutes, and you’ll be able to get your microwave working again!

Summary: If you experience problems opening and closing your microwave door, it might mean the door switch needs to be repaired. To fix the problem, turn off the power at the circuit breaker before removing the access panel. Then, remove the broken switch and replace it with a new one. Connect all wires correctly and follow any instructions included with the new switch. Replace the access panel and restore power to the circuit breaker to finish up.

8 Methods on How to Fix a Microwave Door Switch

If your microwave door switch is broken, it can be highly frustrating. You may not be able to use your microwave at all or only be able to use it on specific settings. Sometimes, the door switch may need to be cleaned to work correctly again. However, if the door switch is broken, you’ll need to replace it. Here are some methods to fix a microwave door switch, with details on each process:

1. Manually Reset the Switch 

first, you need to reset the switch manually. Then, unplug the microwave from the power outlet. Remove the door by unscrewing the screws that hold it in place. After that, locate the door switch and press it down with a flathead screwdriver or a pen. Next, replace the door and screw it back in place. Finally, plug the microwave back in and try to operate it.

2. Clean the Switch 

If your microwave door switch is dirty, it may not be making good contact when the door is closed. However, the cleaning control can fix the problem. Use a cotton swab or toothpick to clean any dirt or debris from the switch contacts. You may need to use a fine file or sandpaper if the connections are dirty.

3. Replace the Switch 

If the switch is damaged, it will need to be replaced. This is a more complicated repair and will require some microwave disassembly. First, unplug the microwave from the power source. Next, remove the door panel by unscrewing the screws that hold it. Be careful not to lose any of the small parts. With the door panel removed, you can access the switch. Unscrew the switch and remove it. Replace it with a new one and screw it in place.

Remove the Door Panel

4. Use a Multimeter

If your microwave door switch is not working, it could be because the switch is faulty. You will need a multimeter to test if the switch is defective. First, disconnect the power to your microwave. Next, remove the door switch from the microwave and connect one lead of the multimeter to each of the terminals on the switch.

If the multimeter reads continuity, the switch is not faulty, and you will need to check other parts of the microwave for the problem. On the other hand, if the multimeter does not read continuity, the switch is faulty and needs to be replaced.

5. Check if There is Any Obstruction

If you cannot see the door switch, there may be an obstruction around it. To check for this, open the microwave door and look for anything that might be blocking the switch. If you see something, remove it and try closing the door again. If the problem persists, contact a professional for assistance.

6. Lubricate the Door Switch 

If your microwave door switch feels stiff or hard to press, it may need to be lubricated. You can do this by applying a drop of oil to the door switch. Be sure to use light oil, such as sewing machine oil or 3-in-1 oil, so it doesn’t damage the switch. Next, apply the oil to a cotton swab and wipe it over the door switch. After lubricating the door switch’s operation, you should see an improvement.

7. Find Replacement Parts

You’ll need to find replacement parts if your microwave door switch is damaged. The best way to do this is to search online for the make and model of your microwave. You can also check with the manufacturer or a local appliance store. Once you have the replacement parts, follow the instructions in the owner’s manual to install them. 

8. Contact a Professional for Help

If your microwave door switch isn’t working after trying all the above steps, then it’s time to contact a professional for help. A qualified technician can diagnose and fix the problem quickly and efficiently. They’ll be able to help you figure out what’s wrong and get your microwave door switch working again in no time!

With these simple steps, you can quickly fix a microwave door switch. Remember to unplug the appliance before any repairs and exercise caution when working with electrical components. With a little effort, you can have your microwave working like new.

Contact a Professional for Help

How to Prevent Damage to the Microwave Door Switch?

One of the essential parts of your microwave is the door switch. Without a properly functioning door switch, your microwave will not be able to start. If the door switch is damaged, it can cause severe problems with your microwave.

There are a few things that you can do to prevent damage to the door switch

  1. Do not use harsh chemicals or cleaners on the door switch.
  2. Wipe away any spills immediately to prevent damage.
  3. Inspect the door switch regularly for signs of wear and tear.
  4. Do not slam the microwave door shut, as this can damage the switch.
  5. If the door switch is not working correctly, do not try to repair it yourself.
  6. Seek professional help if the door switch needs to be replaced.
  7. Store the microwave in a cool, dry place away from direct sunlight.
  8. Do not use the microwave if it appears to be damaged in any way.
  9. Do not allow children to play with the door switch.

Follow the manufacturer’s instructions carefully when using the microwave.

Do Not Use Harsh Chemicals

7 Safety Rules You Need to Remember Before Fixing a Microwave Door Switch

for safety, before attempting any repairs, try to follow these instructions

  1. Unplug the microwave before beginning any repairs.
  2. Inspect the door switch for damage.
  3. Use a multimeter to test the door switch for continuity.
  4. Replace the door switch if it is damaged or not functioning correctly.
  5. Reassemble the microwave and plug it in.
  6. Test the microwave to ensure the door switch is working correctly.
  7. Seek professional help if you are unsure how to fix the door switch.

How Do I Know if My Microwave Door Switch is Bad?

The door switch might blame if your microwave oven doesn’t start. The door switch signals the control board to begin the cooking process when it’s closed and to stop it when it’s open. A faulty door switch can prevent your microwave from creating or cause it to turn off unexpectedly during operation. So how can you tell if your door switch is bad? Here are a few signs to look for:

  • The microwave doesn’t start when the door is closed.
  • The microwave starts and then stops abruptly while cooking.
  • The microwave runs even when the door is open.

If you notice any of these problems, it’s a good idea to test the door switch to see if it’s defective.

How Can You Test a Microwave Door Switch?

There are a few ways that you can test your microwave door switch to see if it is working correctly.

One way is to use a multimeter to test for continuity. To do this, you will need to remove the microwave switch to access the terminals. Once you have access to the airports, you will need to touch one lead of the multimeter to one terminal and the other lead to the other. If the switch works properly, you should see a continuous reading on the multimeter.

Another way to test the door switch is to use a piece of paper. To do this, you will need to hold the piece of paper up to the door and try to close the door. If the switch is working correctly, the door should not close.

If you have tested the door switch and found that it is not working correctly, there are a few things you can do to try and fix it.

You Can Check It Out To Fix a Broken Microwave Plate

Use a Multimeter to Test

Frequently Asked Questions

Why Are There 3 Door Switches in a Microwave?

Microwaves use electromagnetic radiation (EMR) to heat up food. The three switches are used to automatically adjust the power based on the size and weight of the item being microwaved. This way, your food will be evenly heated and won’t come in contact with any open circuits that could cause sparks or fire.

Why Does My Microwave Start When I Close the Door?

There could be a few reasons why your microwave starts when you close the door. One possibility is that the magnet on the front of the oven has come in contact with a metal object, such as a kitchen faucet. If this happens, your microwave will start up automatically whenever you close the door because it detects the magnetic field.

Another possibility is that something has bumped into the microwave while it was turned off – this can cause the power to go back on and the machine to start up. In either case, you can try to remove any obstacles that may be causing the problem and see if that resolves the issue. If not, you may need to call a technician to take a look at your appliance.

Is It Ok to Run a Microwave With Nothing in It?

Yes, it is ok to run a microwave with nothing in it. Microwaves vary depending on the model, but most of them have an automatic shut-off feature that will turn off the power when there’s no food inside. This means that you won’t be cooking anything dangerous or harmful by leaving your microwaves on overnight.

What Happens if You Microwave a Spoon?

Microwaves are one of the safest cooking appliances out there. However, it is important to follow the safety guidelines that have been put in place by the appliance manufacturer. Here are a few tips to help you stay safe while using your microwave:

  1. Always use a microwave-safe bowl when cooking – This will help to prevent any accidents and make sure that your food doesn’t come into contact with any sharp edges on the bowl.
  2. Keep food away from the door and the window – These areas are particularly dangerous because they allow microwave access to your food in a way that is harmful.
  3. Use a timer when cooking – This will help you avoid overcooking your food and making it unsafe to eat.
  4. Keep children away from the kitchen – They are often unsupervised and may not understand how unsafe it is to play near kitchen appliances. Let them play outside or in another room where it is safe!


A microwave door switch is a vital component of the appliance. If the door switch is damaged, it can prevent the microwave from starting. There are a few things that you can do to fix a microwave door switch. You can use a multimeter to test for continuity, or you can use a piece of paper. If the switch is not working correctly, you may need to replace it.

You will find all the information needed on how to fix a microwave door switch if you read the article.

You May Also Read: How to Fix Broken Microwave Handle

Leave a Comment