How to Fix a Blender that Won’t Spin

Is your blender not spinning like it used to? Don’t worry; you’re not alone! In this post, we’ll show you how to fix a blender that won’t spin. We’ll also provide some tips on preventing this from happening again. Keep reading for more information.

Summary: If your blender doesn’t spin, there are several steps you can take to fix it. Start by checking the power cable is connected and working and that the power switch is turned on.

If necessary, check the motor and blade assembly for any signs of damage or blockages. Also, make sure not to overfill the container, as this can affect its ability to blend while also ensuring there is enough liquid in it before adding ingredients.

How to Fix a Blender that Won't Spin

Why It’s Important to Fix a Blender that Won’t Spin?

A blender is an essential kitchen appliance and gets a lot of use. Whether you’re making smoothies, soups, or sauces, a blender can save you time and effort.

However, blenders are also prone to breaking down, and one of the most common problems is that the blades stop spinning. There are a few possible reasons for this, but the most likely culprit is “blender burnout.”

This occurs when the motor overheats from overuse, causing it to shut down. In most cases, fixing a blender that won’t spin is a simple matter of letting it cool down for an hour or so. However, if the problem persists, it’s best to take it to a repair shop.

How to Fix a Blender that Won’t Spin Step by Step Guide

Step 1: Unplug the Blender

Before attempting any repairs, always unplug your blender from the power source to ensure your safety while working on the appliance.

Step 2: Inspect the Blender Jar and Lid

Examine the blender jar and lid for any damage or debris that may be preventing the blender from spinning. Ensure that the lid is securely in place and that there are no cracks, chips, or other issues with the jar that could impact its performance.

Step 3: Check the Blender Base

Inspect the blender base for any visible signs of damage or wear, such as cracks, loose parts, or frayed wires. If you find any issues, you may need to replace the affected components or consult a professional for further assistance.

Step 4: Examine the Blade Assembly

Carefully remove the blade assembly from the blender jar, paying attention to any signs of damage or wear on the blades, gasket, or other components. If the blades are dull, bent, or otherwise damaged, they may need to be replaced.

Step 5: Verify the Drive Coupling

The drive coupling is the component that connects the blender motor to the blade assembly, allowing the blades to spin. Examine the drive coupling for any signs of damage or wear, such as cracks, chips, or stripped teeth. If the drive coupling appears to be in poor condition, it will likely need to be replaced.

Step 6: Test the Blender Motor

If the blender jar, lid, blade assembly, and drive coupling all appear to be in good condition, the issue may lie with the blender motor. To test the motor, plug the blender back in and turn it on without the jar and blade assembly attached. If the motor does not spin, it may need to be repaired or replaced.

Step 7: Replace Damaged Components

If you have identified any damaged components during your inspection, replace them with new, compatible parts. This may include the blade assembly, drive coupling, gasket, or other components, depending on the specific issue. Always consult your blender’s user manual or the manufacturer’s website for information on purchasing replacement parts and instructions for installation.

Step 8: Reassemble the Blender

Once you have replaced any damaged components, reassemble the blender by following the steps in reverse order. Ensure that all parts are securely in place and that there are no loose or missing components.

Step 9: Test the Blender

Plug the blender back into the power source and turn it on to test its performance. If the blender still does not spin, there may be an underlying issue that requires professional assistance.

Step 10: Consult the Manufacturer or a Professional

If you are unable to identify the issue or fix the blender yourself, consult the manufacturer or a professional appliance repair technician for further guidance. They may be able to provide additional troubleshooting steps, repair services, or replacement parts to resolve the issue.

Step 11: Perform Routine Maintenance

To prevent future issues with your blender, perform routine maintenance and cleaning on the appliance. This may include regularly checking for signs of wear or damage, cleaning the blender jar and blade assembly, and ensuring that the blender is used and stored properly. Regular maintenance can help to extend the life of your blender and ensure that it remains in good working condition.

By following these steps, you can effectively troubleshoot and repair a blender that won’t spin. Whether the issue is with the blender jar, blade assembly, drive coupling, or motor, addressing the problem promptly and performing regular maintenance can help to keep your blender functioning properly and allow you to continue enjoying your favorite blended beverages and recipes. Remember that if you are ever unsure about how to proceed or are not confident in your ability to perform the necessary repairs, seeking help from a professional technician or the manufacturer is always a wise choice to ensure your safety and the proper functioning of your appliance.

Step 12: Consider Replacement

If your blender is particularly old or you have encountered multiple issues with its performance, it may be more cost-effective to consider purchasing a new blender instead of investing in further repairs. Research various blender models and compare their features, performance, and cost to make an informed decision on the best option for your needs.

Step 13: Proper Use and Handling

One of the best ways to prevent blender issues is to use the appliance correctly and handle it with care. Always follow the manufacturer’s instructions for use, and avoid overloading the blender, blending extremely hard or frozen ingredients without proper preparation, or using the blender for longer than recommended periods. Proper use and handling can help to prevent damage and extend the life of your blender.

Step 14: Store the Blender Correctly

When not in use, store your blender in a cool, dry place away from heat and moisture. Ensure that the blender is clean and dry before storing it, and avoid stacking heavy objects on top of the appliance to prevent damage. Proper storage can help to protect your blender from damage and ensure that it is ready for use whenever you need it.

Step 15: Educate Yourself on Blender Care

Take the time to learn about proper blender care and maintenance, including how to clean and store the appliance, how to troubleshoot common issues, and when to seek professional help for repairs. Familiarizing yourself with these topics can help you to maintain your blender more effectively and address any issues that may arise more efficiently.

By implementing these additional steps, you can further protect your blender from damage and extend its lifespan, ensuring that you can continue to enjoy your favorite blended recipes for years to come. Maintaining a proactive approach to blender care and keeping a close eye on your appliance’s performance can help you to address any issues early on and prevent more significant problems from developing. And remember, if you ever have any doubts about your ability to troubleshoot or repair your blender, it is always best to consult a professional or the manufacturer for assistance.

How Do I Fix a Stuck Blender?

If your blender is having trouble blending, you can do a few things to fix the problem. First, check to ensure that the blades are properly mounted and that nothing is blocking them from spinning freely. If the blades are mounted correctly, and nothing is blocking them, the motor may have a problem. To test this, plug the blender in and turn it on.

If the motor is running, but the blades are not moving, then it is likely that the coupling between the motor and the blades has come loose. To fix this, tighten the coupling using a screwdriver or another tool.

Finally, if your blender still will not blend, you may need to replace the motor. This is a more difficult repair, so it is best to consult a professional if you are not confident in your ability to repair yourself.

You Can Check It Out To Fix Ninja Blender

How Do You Disassemble a Blender?

Disassembling a blender is not as difficult as it may seem. With a little time and patience, anyone can do it. The first step is to remove the jar from the base. To do this, unscrew the ring that holds the jar in place. Next, remove the blades from the jar. The blades are sharp, so be careful when handling them.

Once the blades are removed, the jar can be washed with soap and water. The final step is to disassemble the base of the blender. This can be done by removing the screws that hold it together. Again, with a little practice, disassembling a blender will be a breeze.

What Can You Do with A Broken Blender?

A broken blender is not the end of the world. There are plenty of ways to use a blender, even if it no longer functions as intended. For example, a broken blender can be used as a paperweight or doorstop. It can also be repurposed as a vase or plant holder.

A Broken Blender Can Be Used

If the blender is made of glass, it can even be used as a drinking glass. Of course, a broken blender can also be recycled or turned into art. So, before you throw away your broken blender, consider how it can still be put to good use. Keep reading for more information about how to fix a blender that won’t spin.

Frequently Asked Question

Can a Blender Be Repaired?

Yes, a blender can be repaired. If your blender is not spinning, it may just need a new blade. You can purchase a new blade at most stores that sell kitchen appliances.

Why Is Blender Stuck in Object Mode?

Some common reasons why a blender might be stuck in object mode include:

  • The user forgot to press the “P” key to enter pose mode
  • The mesh is too complex and needs to be simplified
  • The pivot point is not in the correct location
  • The object is not properly aligned with the world grid

What Happens when A Blender Overheats?

When a blender overheats, it can cause significant damage to the internal components. In addition, if the blender has been running for an extended period of time, the motor can overheat and cause the blades to stop spinning. This can also cause the motor to seize up and may require the replacement of the entire unit.


If your blender isn’t spinning, it could be a few different things. We’ve outlined the most common problems and their solutions to get your blender up and running again in no time. Have you tried any of these fixes? Let us know how they worked for you! Thanks for reading our post about how to fix a blender that won’t spin.

You May Also Read: How to Fix Lumpy Cheesecake Batter

Leave a Comment