How to Fix a Bent Pool Leg

It’s the middle of summer. The sun is shining, the birds are singing, and you’re by the pool with your family and friends. But wait, someone just noticed that one of the legs on the pool is bent! What do you do now?

Don’t worry. There is a fix! In this blog post, we will show you how to fix a bent pool leg using some simple methods and steps. So read on and get started today!

Summary: Fixing a pool leg that’s bent can be done in a few simple steps. Start by removing any debris or leaves that may be on the leg, and using a Phillips head screwdriver or a wrench to gently remove the damaged part of the leg. Next, use a pliers to straighten out the damaged area, and then re-attach the leg with new screws or bolts. Finally, clean the area and replace any debris that was removed.

How to Fix a Bent Pool Leg

What Causes the Pool Leg to Bend?

There are a few things that can cause your pool leg to bend. The most common is simply age and wear and tear. Over time, the metal can weaken and bend, especially if it’s not maintained correctly.

Another common cause is rust. If the metal on your pool leg is exposed to water for too long, it can start to rust and deteriorate. This is why it’s important to check your pool for any signs of water damage regularly.

Once you’ve determined the cause of the problem, you can start to look at how to fix a bent pool leg.

9 Necessary Steps on How to Fix a Bent Pool Leg

Step 1: Determine the Cause of the Bent Pool Leg

The first step is to determine what caused the pool leg to bend in the first place. This will help you to know how to fix it properly. One common cause of bent pool legs is a build-up of rust and corrosion. Another reason can be from freezing and thawing cycles during winter.

Determine What Caused the Pool Leg to Bend

Step 2:  Cut Out the Damaged Pool Leg

Once you know the cause of the bent pool leg, you will need to cut out the damaged portion. You will need a saw to do this properly. Make sure you wear safety goggles and gloves to protect yourself from the metal debris.

Step 3:  Measure and Cut a New Pool Leg

After you have cut out the damaged pool leg, you will need to measure and cut a new one. You can use the old leg as a template for this. Make sure that the new leg is slightly longer than the old one so that it can be inserted into the ground more easily.

Step 4:  Insert the New Pool Leg

You will need to insert the new pool leg into the ground. Make sure that it is level and plumb before you secure it in place. You can use a shovel or post-hole digger to help with this. You can also use concrete to ensure the new pool leg is in place.

Step 5: Add Rust Prevention Treatment

After the new pool leg is in place, you must add a rust prevention treatment. This will help to prevent the pool leg from bending again in the future. You can find these products at your local hardware store. Most people use a rust converter or a rust inhibitor.

Step 6: Add Soil Around the New Pool Leg

Once the rust prevention treatment has been added, you will need to add soil around the new pool leg. This will help to secure it in place and prevent it from moving. You can use any type of soil for this; however, sand is often used because it is easy to work with.

Add Soil Around the New Pool Leg

Step 7:  Add Water to the Soil

After the soil has been added, you will need to add water. This will help to settle the soil and prevent the pool leg from moving. You can use a hose or a watering can for this. Ensure that you add enough water, so the soil is moist but not soggy.

Step 8:  Add a Pool Cover

Now, you will need to add a pool cover. This will protect the pool and keep dirt and debris out. You can find pool covers at your local hardware store or online. Make sure you get one that is the right size for your pool.

Step 9: Test the New Pool Leg

After the pool cover has been added, you will need to test the new pool leg. You can do this by putting a small amount of weight on it and seeing if it holds. If it does not hold, you may need to add more soil or water.

Now, you can enjoy your pool! You no longer have to worry about the pool leg bending or breaking. This fix should last for many years to come.

This Fix Should Last for Many Years to Come

5 Effective Methods to Fix a Bent Pool Leg

You can use these  methods to fix a bent pool leg:

Method 1:  Use a Pool Cover

If your pool has a cover, you can use it to help straighten out a bent pool leg. Simply place the cover over the affected area and let the weight of the water in the pool push down on the cover. This will help straighten out the bent leg.

Method 2: Use a Pool Noodle

If you have a pool noodle, you can use it to help straighten out a bent pool leg. This is similar to the method above, but you will use the pool noodle instead of a rope or strap.

First, take your pool noodle and cut it in half with a sharp knife. Next, tie each half of the pool noodle around each side of the bent pool leg, making sure that the pool noodle is tight against the leg. Finally, use a long pole or stick to push down on the pool noodle in the middle, straightening out the bent pool leg.

Method 3: Use a Pipe Wrench

If you have a pipe wrench, you can use it to help straighten out a bent pool leg. If you have a long pipe wrench, you can put it on the bent pool leg and use it as a lever to help straighten the leg. You may need someone to help you hold the pool leg in place while you use the pipe wrench.

If you don’t have a pipe wrench, you can try using a regular wrench. Put the wrench on the bent pool leg and try to use it as a lever to straighten out the leg. You may need someone to help you hold the pool leg in place while you use the wrench.

Method 4:  Use a Hammer

Using this method, First, take the piece of scrap wood and place it over the bent pool leg. Next, take the hammer and lightly tap the wood until the pool leg is straightened out. Finally, use the Phillips head screwdriver to tighten the screws on the pool leg.

Method 5: Use a Ratchet Strap

This is very similar to the method above with the ratchet strap. The only difference is that you’ll need to loop the strap around the pool leg, not the entire pool. This will give you more leverage to pull the leg back into place.

Start by putting the ratchet strap around the bent pool leg. Then, pull the strap tight and attach the ratchet to the other end of the strap. Next, use the ratchet to tighten the strap until the pool leg is straight. Finally, remove the strap, and you’re done!

This method is a bit more complicated than the others, but it’s still relatively easy. And, it’s a great way to fix a bent pool leg without calling a professional.

Above With the Ratchet Strap

Safety Precautions You Need to Know Before Fixing a Bent Pool Leg

  1. Make sure the pool is empty before beginning any repairs. Try not to work on the pool while water is in it, as this can be very dangerous.
  2. Always wear gloves when working with pool parts or chemicals. This will protect your hands from getting cut or coming into contact with harsh chemicals.
  3. Make sure you have all the necessary tools and materials before beginning any repairs. This will help to avoid any delays or accidents.
  4. Follow the manufacturer’s instructions carefully when making any repairs. This will help to ensure that the repairs are done correctly and safely.
  5. Always take your time when making repairs. Hurrying can lead to mistakes which could be dangerous.
  6. Be sure to dispose of any chemicals or pool parts properly. This will help to keep everyone safe and healthy.
  7. Ask for help if you are unsure how to do something or feel unsafe. It is better to ask for help than to risk injury or making a mistake.

Pool repairs can be tricky and dangerous if you don’t take the necessary precautions.

Conclusion

So, if you have a bent pool leg, there are some things that you can do to try to fix it. We’ve outlined the steps on how to fix a bent pool leg that you need to take to correct the problem. 

However, if you cannot fix the issue on your own, or if it continues to occur even after taking corrective measures, it is best to consult a professional. A pool technician can assess the situation and recommend an appropriate solution. Have you fixed your bent pool leg? If so, tell us how you did it!

You Can Chack It Out Fix Pool Tile That Fell Off

Leave a Comment