There’s nothing more frustrating than a shower door that won’t close. If your shower door won’t close, it can be a real inconvenience. But don’t worry, there are a few things you can do to fix the problem. In this blog post, we’ll show you how to fix shower door that won’t close.
We’ll also discuss some of the reasons why your shower door might not be closing properly. So whether your shower door is sticking or completely refusing to close, read on for some tips on how to get it working again.
Tools You Will Need
- Adjustable Wrench
- Screwdriver
- Pliers
- Replacement door seal (if necessary)
Why Won’t My Shower Door Close?
Have you ever gone to take a shower, only to find that your shower door won’t close? There are a few possible reasons for this. First, the door may be dirty or covered in soap scum. This can cause the door to become sticky, making it difficult to close. You can clean the door with a glass cleaner or a vinegar solution. If this doesn’t work, the problem may be with the hinges. The hinges may need to be adjusted or lubricated.
You can try adjusting the hinges yourself, but if they seem to be damaged, you may need to replace them. Finally, the problem could be with the frame of the shower door. If the frame is warped or bent, it can cause the door to bow and not close properly. In this case, you will likely need to replace the shower door. So if your shower door won’t close, don’t panic! There are a few simple things you can try to fix the problem.
8 Steps Guide on How to Fix Shower Door That Won’t Close
Step 1: Inspect the Door
The first thing you’ll want to do is inspect the door. Look for any dirt, soap scum, or other debris that may be preventing it from closing properly. If you spot any buildup, use a glass cleaner and cloth to wipe it away. If you do not see any visible dirt or debris, move on to the next step. Proper inspection is key to determining how to fix the problem. Lots of methods to inspect the door properly.
Step 2: Check The Hinges
If your shower door is still not closing properly, take a look at the hinges. Make sure they are properly seated in the frame and that all screws are tight. If any of the screws have come loose or broken, you will need to replace them. If you do not have replacement screws, consult your instruction manual or contact the manufacturer for the correct size and type. Hinges are the key part of the door that ensures it closes easily and securely.
Step 3: Adjust The Striker Plate
The striker plate is located on the door jamb and is used to latch the door shut. You may need to adjust this plate if the door won’t close properly. To do this, loosen the screws with an adjustable wrench and move the plate up or down until it aligns with the door. Proper adjustment of the striker plate is essential for a secure and properly functioning door.
Step 4: Clean & Lubricate The Hinges
If your hinges are rusty or sticking, it may be preventing the door from closing properly. Clean the hinges with a cloth and rubbing alcohol, then lubricate them with light oil or WD-40 to help them move freely. By lubricating the hinges, you can ensure that they are working as they should and your door closes properly.
Step 5: Replace The Door Seal
If your shower door is still not closing properly after adjusting the striker plate and cleaning and lubricating the hinges, it may be time to replace the door seal. To do this, remove the old seal with a screwdriver and pliers, then install a new one. Proper replacement of the door seal is essential for keeping your shower watertight and preventing leaks.
Step 6: Replace The Hinges
If adjusting the striker plate and replacing the door seal doesn’t work, you may need to replace the hinges. Make sure to get the right size and type of hinge for your shower door. If you’re not sure which ones to get, consult a professional. Sometimes, replacing the hinges can be tricky, so it’s best to leave this job to the experts.
Step 7: Check The Frame
If your shower door still won’t close after all these steps, take a look at the frame. It may be bent or warped, preventing the door from closing properly. If this is the case, you may need to replace the entire door. The frame can be replaced by a professional or you can purchase a new door and install it yourself.
Step 8: Prevent Future Issues
Finally, take some steps to prevent future issues with your shower door. Make sure to clean it regularly and check that all screws are tight. Also, consider investing in a high-quality shower door seal to help keep the door in place. By preventing any potential problems, you can keep your shower door in great shape and it will last much longer!
By following these steps, you can easily fix a shower door that won’t close. It may take some trial and error to find the exact cause of the issue, but with a bit of patience and persistence, you should be able to get your shower back up and running in no time! Good luck!
How to Adjust the Striker Plate on a Shower Door
The striker plate is a small, but important, part of your shower door. Its purpose is to keep the door shut when not in use and to provide a smooth surface for the door to close against. Over time, the striker plate can become misaligned, making it difficult to close the door or causing it to catch on the frame.
If this happens, it is relatively easy to adjust the striker plate. First, remove the screws that hold it in place. Then, reposition the plate so that it lines up with the latch on the door. Be sure to tighten the screws securely before testing the door. With a little care and attention, you can keep your shower door functioning smoothly for years to come.
How to Replace the Door Seal on a Shower Door?
A door seal is an important component of any shower door, as it helps to create a watertight seal that prevents water from leaking out. Over time, however, door seals can deteriorate and need to be replaced. Fortunately, this is a relatively easy process that can be completed in a few simple steps.
First, remove the old door seal by gently pulling it away from the door frame. If the seal is particularly stubborn, you may need to use a putty knife or another sharp tool to loosen it. Once the old seal is removed, use a moist cloth to clean the door frame and remove any residue.
Next, measure the length of the door frame and cut the new door seal to size. Make sure to leave enough excess sealant so that it can be easily inserted into the door frame. Once the new seal is in place, use your fingers to press it into the frame and create a tight seal.
Finally, use a caulk gun to apply a bead of caulking around the perimeter of the door frame. This will further help to prevent water from escaping from your shower. Allow the caulking to dry for 24 hours before using your shower. By following these simple steps, you can easily replace a worn-out door seal and ensure that your shower remains watertight for years to come.
How to Fix a Sticking Shower Door?
If your shower door is sticking, it’s probably because the seal around the door is no longer intact. Over time, the sealant can break down, leaving gaps that allow water to seep through. As a result, the door may start to stick or feel unpleasantly damp when you use it. Luckily, there are a few easy ways to fix this problem.
One option is to simply reseal the door. This will require you to remove the old sealant and apply new sealant around the door frame. Make sure to use a waterproof sealant that will stand up to regular exposure to water. If you’re not confident in your ability to do this yourself, you can always hire a professional to do it for you.
Another option is to install a new shower door. This will be more expensive than simply resealing the existing door, but it will also provide a much more effective barrier against water leakage. Plus, it will give your bathroom a fresh, new look. If you decide to go this route, be sure to choose a door that is made from durable materials and that fits snugly into the opening of your shower stall.
Either way, by taking care of this problem now, you can prevent larger issues down the road. So don’t delay – get your shower door fixed today!
Conclusion
You should now be able to fix a shower door that won’t close. If your problem is with the hinges, make sure they are aligned properly and tightened. You should determine carefully how to fix shower door that won’t close. If the problem is with the tracks, clean them out and make sure they are level. You may need to adjust the settings on your shower doors so they close properly.
Most shower doors have a small plastic or metal tab that can be adjusted to make the door open and close more easily. If your door still isn’t working properly after making these adjustments, you may need to replace the door hinges or get a new shower door.