If you’ve been living under a rock, you know that broken microwave handles are all the rage. No, I’m not talking about the brokenness where the door doesn’t close or the window busted out, but I’m talking about when the handle breaks off. This is a common problem with microwaves and is often fixed.
If your microwave handle is broken, don’t worry! You can fix it easily and cheaply. In this blog post, we’ll show you how to fix broken microwave handle. It’s a simple process that only takes a few minutes.
Summary: This blog post will provide step-by-step instructions on how to fix a broken microwave handle. We will explain how to use Sugru, super glue, duct tape, a hot glue gun, epoxy and pipe cleaner to mend the handle.
Additionally, we will discuss how to use wire, a rubber band, hair tie and safety pin as alternatives. After reading this article you’ll have all the tools and knowledge you need to easily fix a broken microwave handle.
10 Methods on How to Fix Broken Microwave Handle
1. Use Sugru
If the handle of your microwave is broken, you can use Sugru to fix it. All you need is a few minutes and this easy-to-use adhesive. First, clean the area around the break with isopropyl alcohol. This will help the Sugru adhere better. Next, form the Sugru into a ball and press it onto the suspension. Use your fingers to smooth out the Sugru and blend it in with the rest of the handle. Leave the Sugru to cure for 24 hours. Your microwave handle will be as good as new!
2. Use Super Glue
Super glue is another excellent option for fixing a broken microwave handle. Just like epoxy, you’ll need to clean both surfaces before applying the glue. Apply a small amount of glue to one side, press the two pieces together and hold for a few seconds. Allow the glued area to dry for 24 hours before using your microwave again.
3. Use Duct Tape
If your microwave handle is broken and you don’t have the time or money to replace it, you can use duct tape to hold it in place. Just clean the area well first so that the video will stick. You may also want to put a layer of cardboard between the handle and the door to keep it from rattling.
4. Use a Hot Glue Gun
If the break is clean, you can use a hot glue gun to fix it. First, clean the area around the crack with rubbing alcohol. Then, apply a small amount of glue to the break and hold it together until the glue sets. You may need to use a few coats of sealant to get a strong bond.
5. Use Epoxy
If you have epoxy, you can use it to fix the handle back in place. First, clean the area around the broken handle with alcohol. This will help the epoxy to adhere better. Then, mix equal parts of the epoxy and apply it to the broken handle. Finally, press the handle back and hold it there for a few minutes while the epoxy dries.
6. Use a Pipe Cleaner
If you have a pipe cleaner, you can use it to fix your broken microwave handle. Just thread the pipe cleaner through the holes in the handle and twist it to secure it. This quick and easy fix will hold the handle in place until you can get a replacement.
7. Use Wire
If you have a wire, you can use it to fix your broken microwave handle. Just wrap the wire around the fractured handle and secure it in place. This will hold the handle in place until you can get a replacement.
8. Use a Rubber Band
If you have a rubber band, you can use it to fix your broken microwave handle. Just put the rubber band around the handle and over the door. This will help to keep the hold in place and prevent it from falling off.
9. Use a Hair Tie
If you have a hair tie, you can use it to fix your broken microwave handle. Just take the hair tie and wrap it around the broken handle. Make sure that you cover it tightly so that it will stay in place. This is a quick and easy fix that anyone can do.
10. Use a Safety Pin
If the plastic tab on your microwave handle is broken, you can use a safety pin to hold it in place. Just insert the safety pin through the hole in the tab and then through the corresponding hole in the handle. The sharp point of the nail will keep the charge from slipping out. You may need to use a few pins if the handle is large.
If the handle is loose, but the tab is still intact, you can use the safety pin to secure the handle to the door. Just insert the hook through the hole in the bill and then through the hole in the metal plate attached to the door. The point of the pin will keep the handle from sliding around.
You can try any of these methods to fix your broken microwave handle.
You Can Check It Out To Fix a Microwave That Sparks
How to Prevent Your Microwave Handle From Breaking?
It’s easy to take the microwave for granted. Have you ever stopped thinking about how often you rely on it? If your microwave handles break, it can be a significant inconvenience. However, you can do a few things to prevent your microwave handle from splitting.
1. Use mild detergent to clean your microwave door handle. Strong cleaning chemicals can cause the handle to break down over time.
2. Avoid slamming the microwave door shut. This can put undue stress on the handle, causing it to break.
3. Inspect the door handle regularly for signs of wear and tear. If you see any cracks or chips, replace the handle right away.
4. Keep the microwave door closed when not in use. This will help prevent the handle from being damaged by stray objects.
5. Store your microwave in a cool, dry place. Extreme temperatures can cause the door handle to warp or break.
By following these simple tips, you can help keep your microwave door handle in good condition for years to come.
How to Remove the Handle of a Microwave?
If your microwave’s handle is broken, you’ll need to remove it before you can replace it. Here’s how:
- Unplug the microwave from the outlet.
- Remove the screws that hold the handle in place. These are usually located on the underside of the handle.
- Carefully pull the handle off of the microwave.
- Once the handle is removed, you’ll be able to access the screws that hold the new handle.
- Follow the instructions with your new handle to install it.
- Plug the microwave back in and test the new handle to ensure it works properly.
Things You Need to Keep in Mind Before Fixing Broken Microwave Handle
1. You need to keep in mind that safety comes first! Make sure to unplug your microwave before attempting any repairs.
2. Take your time and be careful not to damage the microwave door while removing the old handle or installing the new one.
3. Some methods for fixing a broken microwave handle are temporary fixes. If you plan on using your microwave frequently, it’s best to replace the handle with a new one.
4. Always read the instructions with your new handle before attempting to install it.
5. Use the screwdriver to remove any screws attaching the old handle to the microwave door. Then, use the putty knife to pry off plastic caps or covers. With the old handle removed, you should now be able to see the screws holding the new handle in place.
6. Line up the new handle with the holes in the door, then use the screwdriver to secure it. Make sure the grip is snug and tight before moving on.
7. Before plugging your microwave back in, test the new handle to ensure it’s secure and properly functioning.
8. Now that the repair is complete, clean up your work area for a few minutes. Wipe the door handle with a damp rag, then dry everything off with a clean towel.
9. Plug it in and give it a try! With the new handle and the microwave clean, plug it back in. Give it a test run to make sure everything is working correctly.
Enjoy your new microwave handle! With the repair complete, you can now enjoy your functional and good-as-new microwave oven. Congrats!
You Can Check It Out To Fix Magnetron in Microwave
Frequently Asked Questions
Can You Replace Just the Handle on a Microwave?
Depends on the model. Most microwaves come with a removable handle, but some do not. If yours doesn’t have a removable handle, you may need to purchase an additional cover or tray to fit over the upper part of the microwave oven in order to cook your food properly.
What Kind of Glue is Safe in a Microwave?
Most all types of glue are safe in a microwave, but it is important to test the glue before using it in a microwave. Some glues may heat up and become unstable, potentially causing them to burst or ignite.
It is also important to note that some adhesives will react with other chemicals in the oven, such as waxes and cleaners, which can create hazardous fumes. So always be sure to read the packaging instructions carefully before using any type of adhesive inside a microwave.
Why Does My Door Handle Keep Falling Off?
There are a few reasons why your door handle might keep falling off. The most common culprit is dirty or corroded screws that hold the handle on. Over time, this causes the screw to loosen and eventually come off. If the screws are missing entirely, the handle can simply be pulled off.
To fix this problem, you’ll need to take apart the door and replace any corroded or missing screws with new ones. You can also clean the surface where the screw attaches to the door frame with a degreaser and a brush. Finally, you can reattach the screw with a fresh, strong screwdriver by tightening it until it’s snug.
If you still notice that the handle keeps falling off, it may be due to dry rot or rust on the screw threads. In this case, you’ll need to replace the entire door assembly. To do this, you’ll need to remove all of the screws and bolts that hold it together and then replace them with new ones. Be sure to use corrosion-resistant screws when replacing them so that your door doesn’t rust again in the future.
Do You Fix a Plastic Handle on a Microwave?
It is not recommended to fix a plastic handle on a microwave. This may cause the magnetron to overheat, which can lead to burns and other serious injuries. It is best practice to simply remove the handle when you are finished using the appliance.
Conclusion
So there you have it. Finally, your microwave is officially fixed. And all without having to call a repairman (or woman). While we can’t guarantee that this will work for every broken microwave handle, it’s worth giving it a try before shelling out the big bucks for someone else to come and fix your appliance.
If you read the methods, we provided on how to fix broken microwave handle and followed them to the letter. Your microwave should be as good as new in no time.
We hope you found this article helpful. If you have any other tips to fix a broken microwave handle, share them with us in the comments below!