If you’ve ever had to take a shower in a hotel, you know that feeling of relief when you finally find the perfect push-pull shower faucet. But what do you do if yours breaks at home? Fear not – it’s a relatively easy fix! In this blog post, we’ll walk you through how to fix a push pull shower faucet. So, we’ve got you covered whether your knob has just come loose or the entire thing has stopped working. Keep reading to learn more.
Showering is one of the most common morning rituals. Whether you’re in a hurry or taking your time, there’s nothing like a hot shower to start your day off right. But what do you do when your shower isn’t working properly? One option is to take a cold shower, but that’s not very pleasant. Another option is to try to fix the shower yourself, but that can be difficult and time-consuming. The best option is to call a professional plumber to come and fix the problem for you.
If you’re lucky enough to have a push-pull shower faucet, then you know that they can be temperamental. But luckily, most problems with these types of faucets are relatively easy to fix. Here are a few tips on how to fix a push pull shower faucet. So read on and get your shower back in working order in no time.
Summary: If you have a push pull shower faucet, your problem is most likely that the cartridge is kinking or twisted. To fix this, you will need to remove the old cartridge and replace it with a new one. First, unscrew the handle from the faucet. Then use a flathead screwdriver to pry off the cover plate. Next, use a cartridge extractor to pull out the old cartridge. Install the new cartridge by screwing the cover plate back on and tightening the handle.
How Does a Push Pull Shower Faucet Work?
A push-pull shower faucet is a shower valve that uses two handles to control the water flow: one handles the hot water, and the other controls the cold water. The hot and cold water lines are connected to the valve, which is usually located behind the wall of the shower. To operate a push-pull shower faucet, you first need to turn on the main water supply to the house. Next, locate the shut-off valves for the hot and cold water lines that lead to the shower.
These valves are usually located near the floor, behind the toilet or sink. Once you’ve located the shut-off valves, turn them to the “on” position. Then, go to the shower and turn on the hot water by turning the handle to the left. Follow that by turning on the cold water by turning the handle to the right. You should now feel warm water coming out of the shower head.
If you don’t like the temperature of the water, you can change it by turning the handles in the other direction. To turn off the shower, turn off the main water supply to the house and then turn the handles on the shut-off valves to the “off” position.
Tools and Materials
- Push pull shower faucet
- Flat head screwdriver
- Phillips head screwdriver
- adjustable wrench
- Pliers
- Rags or towels
- Pencil and paper
10 Easy Ways on How to Fix a Push Pull Shower Faucet:
1. Check the Water Pressure.
One of the most common problems with a push-pull shower faucet is low water pressure. Use a pressure gauge to check the water pressure and adjust it accordingly.
2. Check the Water Temperature.
Common push-pull shower faucet problems can also be caused by water that is too cold or too hot. To fix this, you will need to adjust the water heater. If the problem is that the water is too cold, you will need to increase the temperature of the water heater. If the problem is that the water is too hot, you will need to decrease the temperature of the water heater.
3. Check the Supply Line.
If you are still having problems with your push-pull shower faucet, the next step is to check the supply line. The supply line is the pipe that connects the water supply to the faucet. If there is a leak in the supply line, it will need to be replaced. First, use a wrench to remove the old supply line and then install a new one.
4. Clean the Faucet.
If your push-pull shower faucet is not working properly, you may need to clean it. Mineral deposits can build up over time and cause the faucet to malfunction. To clean the faucet, you will need to remove the handle. Next, use a screwdriver to remove the screws that hold the handle in place. Once the handle is removed, you can access the valve. Use a toothbrush to clean the valve, and then flush it with water.
5. Adjust the Valve.
If the problem with your push-pull shower faucet is that the water temperature is too hot or too cold, you may need to adjust the valve. The valve is located behind the handle. To access it, you will need to remove the handle. Once you have removed the handle, use a wrench to turn the valve clockwise or counterclockwise until you have reached the desired water temperature.
6. Adjust the O-Ring.
If your push pull shower faucet is leaking, the problem is most likely with the O-ring. The O-ring is a small rubber ring that seals the connection between the handle and the valve. Over time, the O-ring can become worn or damaged, which will cause leaks. Simply remove the handle and unscrew the old O-ring to replace the O-ring. Then, screw on a new O-ring and reassemble the handle.
7. Check the Valve Seat.
If the O-ring is not the problem, then the next step is to check the valve seat. The valve seat is the area where the ball sits. If this is damaged, then it will cause water to leak from the shower faucet. To check the valve seat, remove the ball and inspect it for any damage. If there is damage, then you will need to replace the valve seat.
8. Check the Washers.
If the valve seat is not the problem, then the next step is to check the washers. Remove the handle, and unscrew the packing nut with a wrench. Be careful not to damage the finish on the faucet. With the packing nut removed, you should be able to pull out the stem and inspect the washers. If they are worn or damaged, then they will need to be replaced.
Replacing the washers is a relatively easy task, and you should be able to find replacement washers at your local hardware store.
9. Check the Diverter.
If your push-pull shower faucet is still not working properly, the next step is to check the diverter. The diverter is a small valve located behind the faucet handle. To check the diverter, remove the handle and look for a small hole in the valve. If the hole is clear, the diverter is working properly. If the hole is plugged, the diverter needs to be replaced.
10. Replace the Entire Faucet.
If you have followed all of the steps and your push-pull shower faucet is still not working properly, you may need to replace the entire faucet. You can find a variety of replacement shower faucets at your local hardware store. Be sure to take the old faucet with you to ensure you get the correct replacement.
Removing and installing a shower faucet is a fairly easy process. Turn off the water supply to the shower, remove the old faucet, and install the new one in its place. Follow the manufacturer’s instructions carefully to ensure a proper seal. If you are not comfortable removing and installing the shower faucet yourself, you can always hire a plumber to do it for you. With a little bit of time and effort, you should be able to fix your push-pull shower faucet and get it working like new again.
You Can Check It Out to Fix Leaking Shower Without Removing Tiles
Tips and Warnings on How to Fix a Push Pull Shower Faucet:
Tips:
- Be sure to turn the water off at the main supply before you begin any repairs.
- Inspect the faucet for any visible damage. If there is any damage, it will need to be repaired or replaced before you proceed.
- Check to see if the problem is with the hot or cold water by turning on one at a time and testing the water temperature.
- If the problem is with the hot water, check the hot water heater to see if it needs to be replaced.
- If the problem is with the cold water, check the main water supply to see if it needs to be replaced.
- Once you have determined the problem, you can begin to repair the faucet.
- If the problem is with the hot water, you will need to replace the washer on the hot water side of the faucet.
- If the problem is with the cold water, you will need to replace the washer on the cold water side of the faucet.
- Once you have replaced the washers, turn the water back on at the main supply and test the faucet to see if it is working properly.
- If the problem persists, you may need to replace the entire faucet.
Warnings:
- Turn off the water at the shutoff valves before you begin any work on the shower faucet.
- Don’t use too much force when working with the shower faucet components. Excessive force can damage the pipes or other parts of the fixture.
Frequently Asked Questions
Why Does My Shower Diverter Not Work?
One possibility is that the switch itself may be defective, and in this case, you should replace it. If the problem lies elsewhere (like beneath the floor), then a professional plumber might need to come and service the plumbing. In any case, if you can’t figure out where the defect is located, it’s best to call a licensed technician to inspect your system.
Can a Shower Diverter Be Repaired?
In most cases, the repair is a fairly simple task that can be completed by a homeowner with basic DIY skills. The most common issue with shower diverters is that they get clogged up with soap and water residue. This residue can build up over time and cause the diverter to stop working properly. To repair a shower diverter, you will need to remove the obstruction and clean the diverter mechanism with a mild soap solution. You can then re-lubricate the parts with a suitable lubricant and replace the component if necessary.
Can You Use Wd40 on Shower Diverter?
This solvent is commonly used to remove dirt and corrosion from metal surfaces. It is also effective at removing soap scum and other build-ups on pipes and fittings. Simply spray WD40 onto the area that needs cleaning, let it sit for a few minutes, then rinse off with hot water.
Do You Need to Turn off Water to Replace Shower Diverter?
This is a common question and the answer may vary depending on your locale. In some cases, it might not be necessary to turn off the water in order to replace the shower diverter. If you have a municipality-issued shutoff valve, then simply turning off the main supply line should do the trick.
Conclusion
Although it is possible how to fix a push pull shower faucet, it may be easier and more cost-effective to replace the entire fixture simply. If you have determined that the problem is with the cartridge, follow the instructions in this blog post to remove and replace it. If you have determined that the problem is with the valve assembly, follow these instructions to remove and replace it.
However, if none of these solutions work or if you are uncomfortable performing repairs on your own, we suggest contacting a professional plumber for assistance.